T Mack 1 - FSO
Serious Thumper Alliance Member
   
Offline

sold 2001 LS650 for a 1986 XLH1100
Posts: 2919
Emmaus,Pa
Gender:
|
ALittleBird, It might be good to have someone check your idle RPM's. The stop sign/light cut-off is almost alwyas too low an idle.
I noticed with my tach, that the RPM's at idle do change. I think it's has to do with humidity in the air, air density , etc etc....
Also, a warning, these are low oil pressure bikes. If the idle RPM gets too low you could start to cause damage to the cam journal in the head. Yes, I know it sounds cool when the idle is low, but ..... 10W-40 dino oil at 1100 RPM in 85 deg F weather give a 2 PSIG oil pressure. Yes... TWO. ... no typo there. The spec calls for 7-10 PSIG at 3000 RPM.
T Mack
EDIT: I took my oil pressure gauge off because it was a 30 PSIG gauge and in the cool weather (50 deg F) with 20W-50 Mobil One V-twin oil, with cold engine at start-up (thick oil) I could peg the needle. I think I pegged it too many times because it stopped going back to zero when I shut off the bike. Have bid in on a 60 PSIG gauge..... fyi for those that don't remember, I got an eBay special last year that had a melted piston and bad cam journal.
|