SuzukiSavage.com - K&N Filter and carburator question.

Welcome, Guest. Please Login or Register :: View Members

SuzukiSavage.com › General Category › Rubber Side Down! › K&N Filter and carburator question.

(Moderators: verslagen1, Dave, Serowbot)

‹ Previous topic | Next topic ›

Pages: 1

K&N Filter and carburator question. (Read 53 times)

savage_sax YaBB Newbies Offline SuzukiSavage.com Rocks! Posts: 13	K&N Filter and carburator question. 08/29/08 at 10:10:03 I've just installed an OEM-style K&N filter and now the engine is running a little rough. Do I need to adjust the carburetor a little richer or do I need to think about a re-jetting kit?
Back to top	IP Logged

LANCER

Serious Thumper
Alliance Member

Offline

Savage Beast
Performance Parts

Posts: 10875
Oklahoma
Gender: male

Re: K&N Filter and carburator question.
Reply #1 - 08/29/08 at 10:29:19

You are letting more air in so the mix is now leaner. How much ? ?
Start with the pilot circuit, and try adjusting the screw. If it is not enough then you need a larger pilot jet. Then retune with the screw.
Then check the midrange...does the white spacer need to be cut down for a richer mix ?
Then test the high range to see if a larger main jet is needed.
Step by step. Take your time.

IP Logged

savage_sax YaBB Newbies Offline SuzukiSavage.com Rocks! Posts: 13	Re: K&N Filter and carburator question. Reply #2 - 08/29/08 at 12:28:45 Thanks for the info!
Back to top	IP Logged

Pages: 1

‹ Previous topic | Next topic ›

« Home