Serowbot
YaBB Moderator ModSquad
   
Offline

OK.... so what's the speed of dark?
Posts: 29698
Tucson Az
Gender:
|
88, I'm really thinking it's something other than jetting...
You're gonna' want to kick me for saying it, but double check that vacuum line for the presence of any gas...disconnect it at the carb and give it a little suck (no, really),... sometimes they might not leak until vacuum is applied. Switching to prime has been rumored to work around this problem,...but it will not. The leak will still happen. To work around a vac line leak, you have to pull the vac line, cap both ends, then run on prime. That will bypass the system. Try that if want. Or have you done the petc0ck conversion already? I can't remember. If that's definitely O.K. then check that your float needle is seating properly and the float level is correct. Next you need to make sure the needle and slide are moving smooth.
You've got to be getting some gas running around the jet system.
Best of luck, tell me how it checks out... PS...I know what you're going through...I just spent all day rebuilding two carbs on a v-star,.....twice!....Must have missed something on the first go round.
|