SuzukiSavage.com - cylinder gasket

kennycreed

Senior Member
Alliance Member

Offline

Posts: 348
Island Of Lewis SCOTLAND
Gender: male

cylinder gasket
02/06/09 at 22:25:07

It says in the divine hallowed book of words not to put any sealant on the cy. head gasket,(ie.put on a new gasket which I haven't got) but after scraping off the black sealant left from the original gasket on the head and cylinder faces there doesn't seem to be any black stuff left on the gasket itself which is in excellent condition, would just a smear of copper gasket sealant on the faces be detrimental (that's a good one had to get it in somewhere) to torquing the head down

Back to top

trying to be as good a person as my dog thinks I am

IP Logged

rigidchop Serious Thumper Offline don't feed the drama llama Posts: 1105 ravenswood wv Gender:	Re: cylinder gasket Reply #1 - 02/07/09 at 05:03:51 always use a new head gasket.
Back to top	87 VM ED L IP Logged

Oldfeller--FSO

Serious Thumper
ModSquad

Offline

Hobby is now
"concentrated
neuropany"

Posts: 12686
Fayetteville, NC
Gender: male

Re: cylinder gasket
Reply #2 - 02/07/09 at 06:16:07

Metal lip on the head gasket around the cylinder bore ID crushes to make a heat proof tension seal -- use a new one.

Bad bet otherwise, as a head gasket pressure leak means do it all over again. Your top end takes too durn long to take off.

And yet, on flat topped lawmower engines, who hasn't reused a head gasket every now and again? And got away with it?

Back to top

Former Savage Owner

IP Logged

kennycreed

Senior Member
Alliance Member

Offline

Posts: 348
Island Of Lewis SCOTLAND
Gender: male

Re: cylinder gasket
Reply #3 - 02/07/09 at 07:57:35

Aye it makes sense,, BUT! where I live I have to send by post for all my parts and it takes about eight to ten days days. The supplier takes my order then sends to Germany for it. I haven't found anybody in the UK that holds a stock of LS parts maybe if anybody in the UK reads this and knows of a place in the UK that supplies Suzuki LS parts they could let me know,,and thanks for coming back,,all the best to you and yours

Back to top

trying to be as good a person as my dog thinks I am

IP Logged

SV og LS Full Member Offline Kawasaki ZZR 1200 Posts: 236	Re: cylinder gasket Reply #4 - 02/07/09 at 10:42:06 kennycreed wrote on 02/07/09 at 07:57:35: maybe if anybody in the UK reads this and knows of a place in the UK that supplies Suzuki LS parts they could let me know,, I don't live in UK, but M&P appears to have a complete gasket set for less than 70 quid.
Back to top	IP Logged

kennycreed

Senior Member
Alliance Member

Offline

Posts: 348
Island Of Lewis SCOTLAND
Gender: male

Re: cylinder gasket
Reply #5 - 02/07/09 at 15:22:52

Aye right enough. but I have two near complete sets of gaskets but used up the cyl. head gaskets out of both the sets, I am trying to find somewhere that sells the cylinder head gasket separate,,£70 odd pounds is a lot to pay for the set when you only use one gasket, ah'll keep hunting around, surly th'll be some place somewhere that sells gaskets seperate,,cheers,,and all the best and thanks..

Back to top

trying to be as good a person as my dog thinks I am

IP Logged

kennycreed Senior Member Alliance Member Offline Posts: 348 Island Of Lewis SCOTLAND Gender:	Re: cylinder gasket Reply #6 - 02/07/09 at 15:37:34 GOT!! IT!!! www.wemoto.com in West Sussex. cyl. head gasket. £23 tha'tl do me ,they carry a fair stock of LS parts
Back to top	trying to be as good a person as my dog thinks I am IP Logged

Eddy Thomas YaBB Newbies Offline SuzukiSavage.com Rocks! Posts: 31 Rocklin Ca. Gender:	Re: cylinder gasket Reply #7 - 02/07/09 at 16:21:48 How mutch is a Quid??
Back to top	IP Logged

smokin_blue Serious Thumper Offline From Cafes to Streetfighters! I build them all! Posts: 830 St. Paul, MN Gender:	Re: cylinder gasket Reply #8 - 02/07/09 at 18:25:57 Eddy Thomas wrote on 02/07/09 at 16:21:48: How mutch is a Quid?? just a little shy of a squid....??
Back to top	My website http://street-unique.com IP Logged

SV og LS Full Member Offline Kawasaki ZZR 1200 Posts: 236	Re: cylinder gasket Reply #9 - 02/08/09 at 01:48:03 kennycreed wrote on 02/07/09 at 15:37:34: GOT!! IT!!! www.wemoto.com in West Sussex. cyl. head gasket. £23 tha'tl do me ,they carry a fair stock of LS parts Good job. Wemoto were Honda experts a few years back but they seem to have widened their range a bit.
Back to top	IP Logged

kennycreed Senior Member Alliance Member Offline Posts: 348 Island Of Lewis SCOTLAND Gender:	Re: cylinder gasket Reply #10 - 02/08/09 at 09:53:12 £1...100pence
Back to top	trying to be as good a person as my dog thinks I am IP Logged

steely Senior Member Offline Posts: 325 Tulsa, Oklahoma Gender:	Re: cylinder gasket Reply #11 - 02/08/09 at 20:59:28 Eddy Thomas wrote on 02/07/09 at 16:21:48: How mutch is a Quid?? At the current exchange rates, about $1.48 US. (subject to change without notice, poster has no influence on exchange rates)
Back to top	1999 Suzuki Savage IP Logged

Jack_650

Senior Member

Offline

I love YaBB 1G -
SP1!

Posts: 463
Minnesota
Gender: male

Re: cylinder gasket
Reply #12 - 02/09/09 at 08:47:10

I don't like to brag (or preach), but the first thing I did when I got my 650 used was to order a head gasket from Suzuki. I knew from reading this forum that there's quite a few things you can't fake from other parts if need be for the short term, but head gaskets didn't seem to be one of them. I've put over 15k miles on it since then and the gasket is still pressed between the pages of my Clymers out in the garage. My insurance policy against the day I need to change it. Plan ahead so you can shop around for the best price.

I also have a stock of oil filters, an extra set of front brake pads and even a used drive belt. These are all things that we know will need replacing or be hard and time consuming to get if/when they are needed. When a good price for expendables comes along I try to take advantage of the opportunity that knocks.

I'm curious as to what you do to go through head gaskets like that. These seem to be pretty forgiving bikes.

Jack

Back to top

IP Logged

kennycreed

Senior Member
Alliance Member

Offline

Posts: 348
Island Of Lewis SCOTLAND
Gender: male

Re: cylinder gasket
Reply #13 - 02/09/09 at 11:40:25

bike number 1. leaking head gasket and oil plug,then head off again for new valves and seals,,bike number two, stripped cylinder head bolt,head off to helicoil cylinder, I seem to have all the fun, if only it was a bit warmer. I will try and post some pictures once I get onto page 3 or 4 in the COMPUTER FOR ANTIQUATED LEARNERS MANUAL I'm at the moment struggling with page 2 Sad

Back to top

trying to be as good a person as my dog thinks I am

IP Logged