SuzukiSavage.com - Custom bar end turn signals/mirrors ver 2.0

Welcome, Guest. Please Login or Register :: View Members

SuzukiSavage.com › General Category › Rubber Side Down! › Custom bar end turn signals/mirrors ver 2.0

(Moderators: verslagen1, Dave, Serowbot)

‹ Previous topic | Next topic ›

Pages: 1

Custom bar end turn signals/mirrors ver 2.0 (Read 106 times)

diamond jim

Serious Thumper

Offline

Posts: 1425
North Alabama
Gender: male

Custom bar end turn signals/mirrors ver 2.0
02/20/09 at 10:25:43

Here's the newest setup.

Look, I can see the horses out in the field!

The only thing left to do is to take up the little bit of slack in the wires that I needed to fit it all. I replaced the bolts that held the brackets on the bar ends with black allen heads so it looks much more custom now and not so "afterthought bolt on" like it did with the other bolts. These are the same bright amber LED lights I used for ver 1.0. They have slightly smoked lenses. The mirrors have a convex shape.

I'm done for now. Gotta start packing for Atlanta.

IP Logged

verslagen1 YaBB Moderator ModSquad Offline Where there's a will, I want to be in it. Posts: 28999 L.A. California Gender:	Re: Custom bar end turn signals/mirrors ver 2.0 Reply #1 - 02/20/09 at 11:16:33 That's a real sweet custom job.
Back to top	Versey's Place Tech Section Index IP Logged

diamond jim

Serious Thumper

Offline

Posts: 1425
North Alabama
Gender: male

Re: Custom bar end turn signals/mirrors ver 2.0
Reply #2 - 02/20/09 at 11:27:58

verslagen1 wrote on 02/20/09 at 11:16:33:

That's a real sweet custom job.

Smiley

Thanks. I made new brackets for these. This mod didn't cost much moneywise, maybe $35 total (LEDs were $25), but it takes a crap load of detail work and time though. It's definitely not a mod to try if your favorite tool is a hammer!

IP Logged

SimonTuffGuy Serious Thumper Alliance Member Offline i like to thump... ;) Posts: 1159 Central PA Gender:	Re: Custom bar end turn signals/mirrors ver 2.0 Reply #3 - 02/20/09 at 12:20:16 Very nice looking!
Back to top	Simon Pimptiva.com IP Logged

Paladin. Serious Thumper Offline Hamster Posts: 4929 Sunny Southern California Gender:	Re: Custom bar end turn signals/mirrors ver 2.0 Reply #4 - 02/20/09 at 15:04:07 ah..... er..... kinda small. What sort of view do you get with them? And now I have to check the CVC for any reference to the SIZE of a rear view mirror.
Back to top	IP Logged

diamond jim

Serious Thumper

Offline

Posts: 1425
North Alabama
Gender: male

Re: Custom bar end turn signals/mirrors ver 2.0
Reply #5 - 02/20/09 at 15:52:15

Paladin. wrote on 02/20/09 at 15:04:07:

http://i255.photobucket.com/albums/hh128/russ_diamond_jim/S4021506.jpg

ah..... er..... kinda small. What sort of view do you get with them?

And now I have to check the CVC for any reference to the SIZE of a rear view mirror.

CVC? That's the California Code, right? Cool, let me know what you find out.

I see a little better with them especially in some particular situations than I did with stock and aftermarket stemmed mirrors. The stemmed mirrors were great for shoulder inspection. They did provide a small section of glass to use to see behind me. But the slight buzzing in them reduced that ability some and they were only flat glass. Somehow, through modding, I accidentally solved all those issues!

IP Logged

Savage Eddie Full Member Offline Custom Bob's ROCK! Posts: 204 40 miles west of Chicago Gender:	Re: Custom bar end turn signals/mirrors ver 2.0 Reply #6 - 02/20/09 at 20:16:58 well i like em! Ive elected to go with no turn sigs but the law in Illinois says you have to have at least one mirror (nice bike!)
Back to top	IP Logged

Pages: 1

‹ Previous topic | Next topic ›

« Home