WD
Serious Thumper 2005 No Login
   
Offline

Professional "scooter trash".
Posts: 5207
Rosemark TN
Gender:
|
I run 15 inchers, used to run 13.5 apes. Go ahead and lose the bolt, the line will work the same loose as it does secured, IF the hose doesn't get broken in lock to lock turning.
I run a braided brake line on mine, makes the front brake feel firmer.
Watch the engine end of your clutch cable, you're adding some extra side pull with the higher bars. The little locking tab broke off the mount on mine, so I squished the block with pliers and it still works fine. You may want to swap the cable for one from a VN750/800. It has much more fine tuning with its center adjuster, is longer, and definitely stronger. Early Marauder mechanical clutch lever fits the Savage and is available as a wide lever. Much more comfortable with the height increase.
Keep a close eye on your bar wiring bundles, they are extremely fragile and the tank WILL try to break them off with the slack removed.
Go to Lowes and get bronze bushings the same size as your rubber bar mounts. Trust me on this, I have the stock bushing set and the bars/risers move, a lot. Expect a major increase in grip buzz though.
I run 15s. Lisa runs 10.5s on her Intruder. Neither of us will go back to less than the 10 1/2 inch bars.
|