SuzukiSavage.com - Makeshift Starter Button

EJID Serious Thumper Offline Work to ride and ride to work. Posts: 1536 Pocatello, ID Gender:	Makeshift Starter Button 09/05/10 at 20:56:00 Interesting homemade air filter and starter button. Also, what's the deal with moving the battery where he did?
Back to top	05 S40 15" Memphis Slim, FXDWG Bars, Moved Rear Signals, Saddlebags, Fork Bag, Mini-Tach, Raptor, Cone Filter, Fishtail Muffler, Mix Screw Out 2.5 Turns, 4" Fwd Controls, 147.5 Main/55 Pilot @ 4500 IP Logged

verslagen1 YaBB Moderator ModSquad Offline Where there's a will, I want to be in it. Posts: 28996 L.A. California Gender:	Re: Makeshift Starter Button Reply #1 - 09/05/10 at 23:01:43 Looks like he had to make room for his fire extinguiser. he should investigate the mini battery install under the swingarm. The ram air intake is not a good design. Should be a sweeping arc from inlet to carb. That way when run thru a cloud of bugs they'll shoot straight thru to the head before the splatter on the intake valve.
Back to top	Versey's Place Tech Section Index IP Logged

LANCER

Serious Thumper
Alliance Member

Offline

Savage Beast
Performance Parts

Posts: 10802
Oklahoma
Gender: male

Re: Makeshift Starter Button
Reply #2 - 09/06/10 at 02:26:49

verslagen1 wrote on 09/05/10 at 23:01:43:

Looks like he had to make room for his fire extinguiser.
he should investigate the mini battery install under the swingarm.
The ram air intake is not a good design. Should be a sweeping arc from inlet to carb. That way when run thru a cloud of bugs they'll shoot straight thru to the head before the splatter on the intake valve.

LOL

Back to top

IP Logged

mpescatori

Serious Thumper

Offline

Romanum Thumperium
Cavalco, yeaaah !!!

Posts: 3547
Rome, Italy
Gender: male

Re: Makeshift Starter Button
Reply #3 - 09/06/10 at 05:45:03

verslagen1 wrote on 09/05/10 at 23:01:43:

Looks like he had to make room for his fire extinguiser.
he should investigate the mini battery install under the swingarm.
The ram air intake is not a good design. Should be a sweeping arc from inlet to carb. That way when run thru a cloud of bugs they'll shoot straight thru to the head before the splatter on the intake valve.

???

Hey, Verslagen, could you please translate that into layman's English ?
I'm kinda confoozed...
Should the tube from air filter to carb be a sweeping arc ? 90º? 180º?
How can the bugs sweep right nito the head without splattering against the intake valve anyway ?

Back to top

Maurizio Pescatori, Esq.
Gentleman Rider

Mikuni BST40, K&N filter, Stage2 cam, Verslagen tensioner, Sportster muff, 120 proof moonshine, Pirelli MT 66 tourers... and a chain conversion too !

IP Logged

jef.savage Serious Thumper Offline ridin' n slidin' Posts: 638 Boston, MA Gender:	Re: Makeshift Starter Button Reply #4 - 09/06/10 at 06:06:32 But that air intake does look very cool.
Back to top	IP Logged