SuzukiSavage.com - Drive belts

Welcome, Guest. Please Login or Register :: View Members

SuzukiSavage.com › General Category › Rubber Side Down! › Drive belts

(Moderators: verslagen1, Dave, Serowbot)

‹ Previous topic | Next topic ›

Pages: 1 2

Drive belts (Read 417 times)

reondadomino Junior Member Offline Posts: 60 TN Gender:	Re: Drive belts Reply #15 - 03/22/11 at 18:01:53 You guys are awesome! Thanks for your help!
Back to top	IP Logged

Chopped Senior Member Offline Hurts Like hell when you shoot yourself! Posts: 499 Stafford, VA Gender:	Re: Drive belts Reply #16 - 03/23/11 at 05:47:39 I reitterate.... http://suzukisavage.com/cgi-bin/YaBB.pl?num=1174239333
Back to top	"You are the choices you make in life..... I choose to Play Hard.... Ride Hard.... or Die Hard!" IP Logged

engineer

Serious Thumper

Offline

SuzukiSavage.com
Rocks!

Posts: 872

Gender: male

Re: Drive belts
Reply #17 - 03/23/11 at 18:09:48

If you still want to pursue cheap belts check this one out on Ebay, 14mm, 133 teeth, both correct, one and a half inches wide. Now since its' pitch is in metric why not the width. 1 1/2 inches is only about 1/16 of an inch away from the nominal 40mm width for the Savage. Makes me wonder if the vendor on Ebay measured it very closely. I think I'll ask if he can measure the width again.

http://cgi.ebay.com/ebaymotors/1-1-2-REAR-DRIVE-BELT-133-TOOTH-133T-91-99-HAR...

2005 S40, Intruder shocks, Dyna, 52.5/150, 3 washers, 2 turns, modified seat, Raptor

IP Logged

verslagen1 YaBB Moderator ModSquad Online Where there's a will, I want to be in it. Posts: 28997 L.A. California Gender:	Re: Drive belts Reply #18 - 03/23/11 at 18:18:46 Why would they adapt the same dim's as a savage?
Back to top	Versey's Place Tech Section Index IP Logged

Pages: 1 2

‹ Previous topic | Next topic ›

« Home