SuzukiSavage.com - Finally Ready To Paint!

Southpaw Serious Thumper Alliance Member Offline This ol' dog ain't staying on the porch! Posts: 920 Missouri Gender:	Finally Ready To Paint! 04/05/11 at 20:30:00 Took the tins off yesterday for the new paint job! Sure looks different "nekkid" I figure I got about a week to get the chrome off and give everything a good clean and polishing before I get the tank and fenders back. Lots of work to do yet. I'm not near as organized and photo savvy as some here, but I will try to post a few pics as it progresses.
Back to top	2004 Savage. Happiness isn't around the corner, its IN the corners!....I gotta question the integrity of any organization that would have the likes of me as a member...Groucho Marx IP Logged

PerrydaSavage Serious Thumper Alliance Member Offline Riding "The Rock"! Posts: 3522 Republic of Newfoundland Gender:	Re: Finally Ready To Paint! Reply #1 - 04/06/11 at 00:55:13 Sans tins, it is really easy to see why the LS650s can be modified into such sweet lookin' Bobbers! Beautiful!
Back to top	Before you diagnose yourself with depression or low self-esteem, first make sure you are not, in fact, just surrounded by arseholes! IP Logged

EJID Serious Thumper Offline Work to ride and ride to work. Posts: 1536 Pocatello, ID Gender:	Re: Finally Ready To Paint! Reply #2 - 04/06/11 at 07:22:38 And since you have all that extra working room, it would be a good time to check the valve clearances and replace all fuel/vac lines to avoid cracking. Looking forward to seeing the new paint scheme as well
Back to top	05 S40 15" Memphis Slim, FXDWG Bars, Moved Rear Signals, Saddlebags, Fork Bag, Mini-Tach, Raptor, Cone Filter, Fishtail Muffler, Mix Screw Out 2.5 Turns, 4" Fwd Controls, 147.5 Main/55 Pilot @ 4500 IP Logged

Southpaw Serious Thumper Alliance Member Offline This ol' dog ain't staying on the porch! Posts: 920 Missouri Gender:	Re: Finally Ready To Paint! Reply #3 - 04/06/11 at 20:24:47 EJID, great reminder. Thanks!
Back to top	2004 Savage. Happiness isn't around the corner, its IN the corners!....I gotta question the integrity of any organization that would have the likes of me as a member...Groucho Marx IP Logged

MotoBuddha Serious Thumper Offline Let's roll! Posts: 1416 Charlotte, NC	Re: Finally Ready To Paint! Reply #4 - 04/07/11 at 05:42:57 What color?
Back to top	Travel kills ignorance. IP Logged

MulletViper Junior Member Offline Professional Rivethead Posts: 53	Re: Finally Ready To Paint! Reply #5 - 04/07/11 at 17:10:36 Did you remove the wheel to take off the rear fender off? If so I'd like to know how you did it.
Back to top	IP Logged

Southpaw

Serious Thumper
Alliance Member

Offline

This ol' dog ain't
staying on the
porch!

Posts: 920
Missouri
Gender: male

Re: Finally Ready To Paint!
Reply #6 - 04/07/11 at 19:11:45

MotoBuddha - 2011 GM color - 16U - Greystone Metalic

MulletViper - I took the easy way out removing the fender for expediency using a knuckle socket and extension out of my rachet set. It also gave two more days of bike mobility while I clean it. I won't get by with that re-installing it if I value my new paint job. I made the frame lift off this site's tech section per this link... http://www.nightrider.com/biketech/bikelift.htm
I plan on taking the rear wheel off following the clymer manual instructions and continuing my "clean and polish as I go" method as I re-install everything when the tins come back. My painter says he has most everything prepped and may start painting tomorrow depending on how his "real" jobs work out for the day. I can't wait!

Back to top

2004 Savage. Happiness isn't around the corner, its IN the corners!....I gotta question the integrity of any organization that would have the likes of me as a member...Groucho Marx

IP Logged

Southpaw

Serious Thumper
Alliance Member

Offline

This ol' dog ain't
staying on the
porch!

Posts: 920
Missouri
Gender: male

Re: Finally Ready To Paint!
Reply #7 - 04/08/11 at 19:42:00

Spent my time off today doing a real good cleaning and taking the belt guards etc off in anticipation of rear wheel removal. The bottom picture above, now looks like this...

I had to use a hand impact driver to get the screws loose that held the belt guards in place, and caused typical damage to the screw heads.

Used the frame lift to isolate the wheels for a good polishing and a general frame degreasing and polish to finish off the day.

Now all I need is my tins back.

Back to top

2004 Savage. Happiness isn't around the corner, its IN the corners!....I gotta question the integrity of any organization that would have the likes of me as a member...Groucho Marx

IP Logged

verslagen1 YaBB Moderator ModSquad Offline Where there's a will, I want to be in it. Posts: 28996 L.A. California Gender:	Re: Finally Ready To Paint! Reply #8 - 04/08/11 at 20:18:16 Time spent with a little miss polishing her 'chrome' is always time well spent. Of course you know... if you had a spare tank you could still go riding.
Back to top	Versey's Place Tech Section Index IP Logged

Southpaw

Serious Thumper
Alliance Member

Offline

This ol' dog ain't
staying on the
porch!

Posts: 920
Missouri
Gender: male

Re: Finally Ready To Paint!
Reply #9 - 04/12/11 at 20:37:12

Tins came back over the weekend, but the metalflake developed a "stretch" at the roundover on the tank. Not bad, but in a real noticable spot, and one bad spot on the rear fender. I REALLY like the look of the paint scheme on the pieces that came out. I'm not even sure I'm want to put the WWII decals on or not! I've got enough paint to redo the tank and rear fender and my daughter's fiance wanted another shot at it - I said "what the hell, go for it!" ....so here I am waiting for it to come back again! Sure is hard to lean into curves in a Dodge truck!!! Tongue

Back to top

2004 Savage. Happiness isn't around the corner, its IN the corners!....I gotta question the integrity of any organization that would have the likes of me as a member...Groucho Marx

IP Logged

houstonbofh Senior Member Offline SuzukiSavage.com Rocks! Posts: 420 Houston, TX Gender:	Re: Finally Ready To Paint! Reply #10 - 04/13/11 at 08:48:39 My old Dodge leans fine in the curves. The wrong way, but she sure leans!
Back to top	IP Logged