Oldfeller--FSO
Serious Thumper ModSquad
   
Offline

Hobby is now "concentrated neuropany"
Posts: 12686
Fayetteville, NC
Gender:
|
Nope, the push normally comes from the valve springs coming back off full compression.
Likely he has something acting all stiff and rough like .....
If you can roll it freely by hand, try rolling it with the starter motor with no plug.
If the motor won't turn it over, then you got issues to fix.
If the motor will turn it over, give it a few gos (letting the starter cool off between goes of course) and see if it doesn't loosen up some.
Then do it again with the plug in place to make sure it will turn over against full compression.
|