SuzukiSavage.com - Rear signals

McMillan Junior Member Offline Thumpers rule Harleys drool. Posts: 52 Belleville, Ontario, Canada Gender:	Rear signals 11/09/11 at 04:35:07 Ok I am in the process of relocating the rear turn signals. Where should I put them besides the garbage?. Here is where they are now
Back to top	'97, 6" risers, rigid frame, 3.5" rear drop, 2.5" exhaust, custom seat, Arlen Ness mirrors, custom 10" Z bars, fuel tank raised 2" in front and lowered 1" at rear, Jockey shifter. IP Logged

Built2Last Serious Thumper Offline Tempt Fate Posts: 1447 FTF Gender:	Re: Rear signals Reply #1 - 11/09/11 at 06:25:19 The rear fender (just drill some holes) or mini turn signals mounted under the seat but still sticking out..
Back to top	IP Logged

McMillan Junior Member Offline Thumpers rule Harleys drool. Posts: 52 Belleville, Ontario, Canada Gender:	Re: Rear signals Reply #2 - 11/09/11 at 06:32:57 No room for the fender. Its a tight fit between the tire and fender. Bolts or nuts will not fit. I thought about the seat however I didnt want them bouncing when I hit bumps.
Back to top	'97, 6" risers, rigid frame, 3.5" rear drop, 2.5" exhaust, custom seat, Arlen Ness mirrors, custom 10" Z bars, fuel tank raised 2" in front and lowered 1" at rear, Jockey shifter. IP Logged

spacepirates

Serious Thumper

Offline

Igni Ferroque

Posts: 515
Pittsburgh, PA
Gender: male

Re: Rear signals
Reply #3 - 11/09/11 at 06:43:28

Stock ones I'm not sure. You can find tiny LED ones on amazon for around $20 that adhere with double sided tape. Stick those on the rear fender for a streamlined look. You could also put those under the seat, but I don't know how visible they'd be.

http://www.amazon.com/Small-Mini-Turn-Signals-Motorcycle/dp/B003UNPHMK/ref=sr...

Alternatively you could make a bracket for the rear fender to mount the stock ones on. two pieces of 90 degree angle would do it, though it might mess up the lines of the bike a bit.

Back to top

--
Only a biker knows why a dog sticks his head out of a car window.

IP Logged

Serowbot YaBB Moderator ModSquad Offline OK.... so what's the speed of dark? Posts: 29298 Tucson Az Gender:	Re: Rear signals Reply #4 - 11/09/11 at 06:47:36 I put mine on a bracket under the seat... they are stop/tail lights, but could be signals...
Back to top	Ludicrous Speed !... ... ... IP Logged

Built2Last

Serious Thumper

Offline

Tempt Fate

Posts: 1447
FTF
Gender: male

Re: Rear signals
Reply #5 - 11/09/11 at 07:22:22

spacepirates wrote on 11/09/11 at 06:43:28:

Stock ones I'm not sure. You can find tiny LED ones on amazon for around $20 that adhere with double sided tape. Stick those on the rear fender for a streamlined look. You could also put those under the seat, but I don't know how visible they'd be.

http://www.amazon.com/Small-Mini-Turn-Signals-Motorcycle/dp/B003UNPHMK/ref=sr...

Alternatively you could make a bracket for the rear fender to mount the stock ones on. two pieces of 90 degree angle would do it, though it might mess up the lines of the bike a bit.

I'd throw some super glue and duct tape on those too Cheesy

Back to top

IP Logged

Built2Last Serious Thumper Offline Tempt Fate Posts: 1447 FTF Gender:	Re: Rear signals Reply #6 - 11/09/11 at 08:57:33 Arnolds bike has a good RTS setup:
Back to top	IP Logged

groupus

Senior Member

Offline

Maintenance is as
much art as it is
science.

Posts: 296
PA
Gender: male

Re: Rear signals
Reply #7 - 11/09/11 at 19:39:53

spacepirates wrote on 11/09/11 at 06:43:28:

Stock ones I'm not sure. You can find tiny LED ones on amazon for around $20 that adhere with double sided tape. Stick those on the rear fender for a streamlined look. You could also put those under the seat, but I don't know how visible they'd be.

http://www.amazon.com/Small-Mini-Turn-Signals-Motorcycle/dp/B003UNPHMK/ref=sr...

Alternatively you could make a bracket for the rear fender to mount the stock ones on. two pieces of 90 degree angle would do it, though it might mess up the lines of the bike a bit.

I bought a set like that an they dont do sh!t in daylight, or even dusk Angry

. are cool as an axillary signal wired into real turn signals since the leds dont draw much.

this is what i did, made a bracket out of angle iron for the seat and signals. only downside is i sometimes kick the cheapo lights off, but i got lots of spares Grin

Back to top

Faster, faster, faster, until the thrill of speed overcomes the fear of death. ~Hunter Thompson

'03 Savage bobber. Rebuilt too many times.

IP Logged

Built2Last Serious Thumper Offline Tempt Fate Posts: 1447 FTF Gender:	Re: Rear signals Reply #8 - 11/10/11 at 06:25:31 Serowbot wrote on 11/09/11 at 06:47:36: I put mine on a bracket under the seat... they are stop/tail lights, but could be signals... http://i600.photobucket.com/albums/tt82/serowbot/savlmmn010.gif Serow, put a chromed dragpipe and some chromed z-bars and take out your risers and your bike would look so super bitchin'
Back to top	IP Logged

McMillan Junior Member Offline Thumpers rule Harleys drool. Posts: 52 Belleville, Ontario, Canada Gender:	Re: Rear signals Reply #9 - 11/21/11 at 08:05:11 Thanks all for the ideas but none will fit my application will figure something out.
Back to top	'97, 6" risers, rigid frame, 3.5" rear drop, 2.5" exhaust, custom seat, Arlen Ness mirrors, custom 10" Z bars, fuel tank raised 2" in front and lowered 1" at rear, Jockey shifter. IP Logged

Southpaw Serious Thumper Alliance Member Offline This ol' dog ain't staying on the porch! Posts: 920 Missouri Gender:	Re: Rear signals Reply #10 - 11/21/11 at 08:34:40 What about a short L bracket at the old seat bracket mount?
Back to top	2004 Savage. Happiness isn't around the corner, its IN the corners!....I gotta question the integrity of any organization that would have the likes of me as a member...Groucho Marx IP Logged

McMillan Junior Member Offline Thumpers rule Harleys drool. Posts: 52 Belleville, Ontario, Canada Gender:	Re: Rear signals Reply #11 - 11/22/11 at 09:03:35 Those are gone cut the bars off
Back to top	'97, 6" risers, rigid frame, 3.5" rear drop, 2.5" exhaust, custom seat, Arlen Ness mirrors, custom 10" Z bars, fuel tank raised 2" in front and lowered 1" at rear, Jockey shifter. IP Logged