SuzukiSavage.com

Welcome, Guest. Please Login or Register :: View Members

SuzukiSavage.com › General Category › The Cafe › Lancer

(Moderators: verslagen1, Dave, Serowbot)

‹ Previous topic | Next topic ›

Pages: 1

Lancer (Read 103 times)

Jimmer Senior Member Offline SuzukiSavage.com Rocks! Posts: 497 NewportPa. Gender:	Lancer 01/04/12 at 08:20:18 Has anyone heard from Lance, lately. PM him but haven't heard back. Just wondered if he is still on the web site. Thanks
Back to top	IP Logged

splash07 Serious Thumper Offline Posts: 911 Charleston, SC Gender:	Re: Lancer Reply #1 - 01/04/12 at 09:54:13 he is around. I saw a post from him not too long ago. probably just lurking in the shadows somewhere.
Back to top	IP Logged

verslagen1 YaBB Moderator ModSquad Offline Where there's a will, I want to be in it. Posts: 28996 L.A. California Gender:	Re: Lancer Reply #2 - 01/04/12 at 10:07:52 I know he's traveling, not sure when he'll light.
Back to top	Versey's Place Tech Section Index IP Logged

LANCER

Serious Thumper
Alliance Member

Offline

Savage Beast
Performance Parts

Posts: 10803
Oklahoma
Gender: male

Re: Lancer
Reply #3 - 01/04/12 at 23:16:11

verslagen1 wrote on 01/04/12 at 10:07:52:

I know he's traveling, not sure when he'll light.

I officially " LIGHTED " this past Friday.
It's good to be home again.
I've just been laying around and resting...traveling is tiring.
Cool

Jimmer, I used '83 GS wheels but don't remember the specific model.
I did need to use matching brake calipers, disc, and fork set including triple trees.
The head bearings were the same and the front disc pads are the same as stock.
The Ls650 rear brake assembly fits the GS rear wheel hub perfectly. The GS rear wheel for that year and model was a 16" so I found a set of Metzler 880's for a HD Sporty for it which has 19" on the front and 16" pn the rear. It took 100+ psi to get the tire to fully seat on the rim when installed but a benefit is that I could run it without air air and the thing would not come off and would support the weight to ride to a decent stopping place for repair/replacement, and it is a tubeless tire too.

IP Logged

justin_o_guy2

Serious Thumper

Offline

What happened?

Posts: 55279
East Texas, 1/2 dallas/la.

Re: Lancer
Reply #4 - 01/05/12 at 06:40:28

It took 100+ psi to get the tire to fully seat on the rim

HELLO!?!?,,, Isnt that just about 40 pounds over & above SANE?

If ytoure gonna play in that range, please use a clip on air chuck with an airhose running thru a regulator with a gauge, so you can be far away from it.,

I came up with that after messing with tires on a backhoe. Imagine a tractor tire blowing up with 30 pounds in it,, I didnt want to see it happen, so, I thot this up. Its a lot safer..

The people never give up their liberties but under some delusion.- Edmund Burke.

IP Logged

Pages: 1

‹ Previous topic | Next topic ›

« Home