SuzukiSavage.com - Lancer's Performance Parts

LANCER

Serious Thumper
Alliance Member

Offline

Savage Beast
Performance Parts

Posts: 10798
Oklahoma
Gender: male

Re: Lancer's Performance Parts
Reply #45 - 04/16/13 at 19:23:54

Liffey3 wrote on 04/16/13 at 12:02:35:

Hi Lancer,
I have been experiencing email issues. Can you email me at liffey3 at gmail.com? I will pay for the Carb, DAJ, UFO and CAM. My Bike is a 2006. I am doing a 17/43 chain conversion and am a little heavy on the throttle, so whatever CAM will help make up the low end loss I will have with the chain conversion is the one I think I should go for. Number 2 or 3? I do not have the bike apart right now so I do not have a CAM to send. Do you have one to send initially? I am ready to go as the bike is being broke down the end of this week to get painting, new tank, wiring fixes etc. I can pay by paypal when you want.

Thank you,
Jason

Sent you a long email.

Back to top

IP Logged

Jacob Junior Member Offline 2012 Suzuki S40 650 Posts: 60 Ford City, PA Gender:	Re: Lancer's Performance Parts Reply #46 - 04/18/13 at 16:22:31 Hey, I seen you had two hard chrome mufflers left. One small and one big. Is the small one a direct fit? How much do you want for it? I purchased a jet kit from you last year and now need a 50 pilot jet and also need the TEV spring. Can you hook me up?
Back to top	IP Logged

Jacob Junior Member Offline 2012 Suzuki S40 650 Posts: 60 Ford City, PA Gender:	Re: Lancer's Performance Parts Reply #47 - 04/19/13 at 14:53:57 I was able to find and buy a new TEV spring but still in need of the 50 pilot jet and info on the hard chrome muffler.. Thanks
Back to top	IP Logged

LANCER

Serious Thumper
Alliance Member

Offline

Savage Beast
Performance Parts

Posts: 10798
Oklahoma
Gender: male

Re: Lancer's Performance Parts
Reply #48 - 04/19/13 at 18:08:05

Jacob wrote on 04/18/13 at 16:22:31:

Hey, I seen you had two hard chrome mufflers left. One small and one big. Is the small one a direct fit? How much do you want for it? I purchased a jet kit from you last year and now need a 50 pilot jet and also need the TEV spring. Can you hook me up?

The muffler has a 1 3/4" ID which is slightly larger than a stock muffler. Most folks just cut the center out of a soda can and wrap it around the end of the header a time or two, push the new muffler on and clamp it down. The thin aluminum takes up the extra space and "crushes" down quite well and makes a very good exhaust seal. If you ever take the muffler off to do something, I would use fresh aluminum when you put the muffler back to get a good fresh seal. It is as good as most anything else and costs nothing to do it.The muffler is $50 + shp and I will toss the pilot jet in.

Back to top

IP Logged

thecoolerking YaBB Newbies Offline SuzukiSavage.com Rocks! Posts: 17 Kansas Gender:	Re: Lancer's Performance Parts Reply #49 - 07/11/13 at 07:46:48 I'm a new S40 owner and net to the forum so I can't PM yet, but I'd like to order a jet kit. Could you PM me? I know Henryetta. Home of Troy Aikman (at least his HS playing days). Been through there a lot.
Back to top	2005 Suzuki Boulevard S40. Modifications include: Carb Jet-Kit with 52.5 Pilot, 150 Main Jet and reduced needle spacer. Idle screw out 3 turns. Dyna muffler. IP Logged

thecoolerking YaBB Newbies Offline SuzukiSavage.com Rocks! Posts: 17 Kansas Gender:	Re: Lancer's Performance Parts Reply #50 - 07/22/13 at 08:58:01 Thanks Lancer, I got your IM. Sent the paypal payment your way.
Back to top	2005 Suzuki Boulevard S40. Modifications include: Carb Jet-Kit with 52.5 Pilot, 150 Main Jet and reduced needle spacer. Idle screw out 3 turns. Dyna muffler. IP Logged

Stealthmobile YaBB Newbies Offline Play the grey! Posts: 19 whitehorse, yukon, canada Gender:	Re: Lancer's Performance Parts Reply #51 - 07/29/13 at 13:11:21 so much to do and buy, so little time and money!! hi i'll be bugging you about various things, up to and including carb kits, cams, and big bore kits. I hope that I don't drive you nuts with questions and such!
Back to top	'06 s40 stock (for now) IP Logged

LANCER

Serious Thumper
Alliance Member

Offline

Savage Beast
Performance Parts

Posts: 10798
Oklahoma
Gender: male

Re: Lancer's Performance Parts
Reply #52 - 07/29/13 at 18:10:36

Stealthmobile wrote on 07/29/13 at 13:11:21:

so much to do and buy, so little time and money!! hi i'll be bugging you about various things, up to and including carb kits, cams, and big bore kits. I hope that I don't drive you nuts with questions and such!

No problem dude, the "Nuts" set in years ago so it just feels normal now.

Back to top

IP Logged

dirty dog Junior Member Offline SuzukiSavage.com Rocks! Posts: 75 Portsmouth Ohio Gender:	Re: Lancer's Performance Parts Reply #53 - 09/21/13 at 16:38:25 hay lancer are still selling jet kits.
Back to top	IP Logged

LANCER Serious Thumper Alliance Member Offline Savage Beast Performance Parts Posts: 10798 Oklahoma Gender:	Re: Lancer's Performance Parts Reply #54 - 09/22/13 at 03:43:34 dirty dog wrote on 09/21/13 at 16:38:25: hay lancer are still selling jet kits. Yes, though currently out of some sizes which are on back order. It could be weeks before they are available.
Back to top	IP Logged

rob662ca YaBB Newbies Offline SuzukiSavage.com Rocks! Posts: 2	Re: Lancer's Performance Parts Reply #55 - 10/07/13 at 09:13:46 hi, do you still sell the jetset? would you ship to canada?
Back to top	IP Logged

rxthumper YaBB Newbies Offline SuzukiSavage.com Rocks! Posts: 12	Re: Lancer's Performance Parts Reply #56 - 10/21/13 at 22:30:36 do have any timing chains, if so how much?
Back to top	IP Logged

LANCER Serious Thumper Alliance Member Offline Savage Beast Performance Parts Posts: 10798 Oklahoma Gender:	Re: Lancer's Performance Parts Reply #57 - 10/22/13 at 03:51:36 rxthumper wrote on 10/21/13 at 22:30:36: do have any timing chains, if so how much? I don not have chains on hand. Bikebandit.com is a good source if you need it quickly.
Back to top	IP Logged

aegerprimo Junior Member Offline SuzukiSavage.com Rocks! Posts: 53 Tucker, GA Gender:	Re: Lancer's Performance Parts Reply #58 - 10/22/13 at 18:31:42 Lancer, do you have any dyna or other slip-on upgrade that you'd be willing to sell? I ordered a dyna off fleabay and they sent me one with holy baffles. Been told not to spend the money on trying to use it and to buy another but can't find none for less than 60 bucks.
Back to top	IP Logged

LANCER

Serious Thumper
Alliance Member

Offline

Savage Beast
Performance Parts

Posts: 10798
Oklahoma
Gender: male

Re: Lancer's Performance Parts
Reply #59 - 10/23/13 at 05:47:22

aegerprimo wrote on 10/22/13 at 18:31:42:

Lancer, do you have any dyna or other slip-on upgrade that you'd be willing to sell? I ordered a dyna off fleabay and they sent me one with holy baffles. Been told not to spend the money on trying to use it and to buy another but can't find none for less than 60 bucks.

I have a couple of spare mufflers but they are not Dyna's.
One is a "trumpet" style from Apollo Cone; all stainless inside and out and chrome plated. I used it for a while on my stock S40 but it was louder than I wanted so put a dyna back on. I has a 1 3/4" straight through core with spiral baffling around that. It will flow a lot of air. They are $135 new and are a quality unit. I will sell it for $75 + shp in you have interest in it.
I also have a Hard Krome muffler, and it is also a stainless unit with chrome plating. It too has a straight through core with spiral baffling so the sound level and air flow will be similar to the Apollo Cone. It is new, was made for Harley's and sold for $350-375/pr retail. I've had this for a while but never used it. $75 + shp for this one as well.

It is the larger of the 3 shown; all are Hard Krome mufflers

This is the trumpet style

Back to top

IP Logged