Well I lucked out and the weather cleared up by noon and it was dry enough to start in around 2ish. Only took me 7-1/2 hours

Bad part was the head cover 115mm and 125mm bolts were missing and had 1/4" 20 threaded rods sticking up out of the bolt holes not even a nut or anything to hold down the head cover.

No issues putting everything back together even went to the hardware store and found some 5" and 5-1/2" 1/4 bolts to replace the threaded rod with. Until I hit the 130mm head bolt :'( seems like it was previously over torqued to the point of pulling the threads when I tighted it up.

I went ahead and put everything back together so I could turn it over. She idles fine but as expected there was a gusher of oil from the 130mm bolt.
Tommorow I will see if there is anything left down at the bottom to thread a new bolt into, might have to try the 1/4" bolt trick on that one also

if there is enough to thread into.
As for riding in the rain....not by choice

and I was watching my kids while the wife was out so I couldn't go anyways

even if it wasn't raining.