SuzukiSavage.com - Is it time for a Cam replacement?

Welcome, Guest. Please Login or Register :: View Members

SuzukiSavage.com › General Category › The Cafe › Is it time for a Cam replacement?

(Moderators: verslagen1, Dave, Serowbot)

‹ Previous topic | Next topic ›

Pages: 1

Is it time for a Cam replacement? (Read 109 times)

paulmarshall Serious Thumper Offline SuzukiSavage.com Rocks! Posts: 1268 Carterton,New Zealand Gender:	Is it time for a Cam replacement? 09/06/12 at 15:21:52 Hi, I brought this engine recently with 26000 on the clock. I do want to recon it later. I have enclosed a pic of the cam tensioner can anyone advise me by looking at the pic weather I should change cam now or leave it till next year when i replace rings etc. Cheers Paul
Back to top	021.jpg IP Logged

verslagen1 YaBB Moderator ModSquad Offline Where there's a will, I want to be in it. Posts: 28999 L.A. California Gender:	Re: Is it time for a Cam replacement? Reply #1 - 09/06/12 at 15:59:59 It currently looks ok, but it is way out there. measure from the aluminum housing to the edge of the plunger that goes into the housing. 19mm is when you should fix it. 22mm may be too late.
Back to top	Versey's Place Tech Section Index IP Logged

justin_o_guy2 Serious Thumper Offline What happened? Posts: 55279 East Texas, 1/2 dallas/la.	Re: Is it time for a Cam replacement? Reply #2 - 09/06/12 at 16:32:26 Why do you think the rings need replaced?
Back to top	The people never give up their liberties but under some delusion.- Edmund Burke. IP Logged

paulmarshall Serious Thumper Offline SuzukiSavage.com Rocks! Posts: 1268 Carterton,New Zealand Gender:	Re: Is it time for a Cam replacement? Reply #3 - 09/06/12 at 17:23:42 You do make a valid point about the rings, I should just fit it in the frame and use it.
Back to top	IP Logged

paulmarshall Serious Thumper Offline SuzukiSavage.com Rocks! Posts: 1268 Carterton,New Zealand Gender:	Re: Is it time for a Cam replacement? Reply #4 - 09/06/12 at 18:29:11 Hi, It measures 20 so I better replace it. Is it a difficult job? I am mechanically minded and have tools but never done this before. Cheers Paul
Back to top	022.jpg IP Logged

verslagen1 YaBB Moderator ModSquad Offline Where there's a will, I want to be in it. Posts: 28999 L.A. California Gender:	Re: Is it time for a Cam replacement? Reply #5 - 09/06/12 at 18:35:48 depends on whether you're going verslavy or replace the chain
Back to top	Versey's Place Tech Section Index IP Logged

paulmarshall Serious Thumper Offline SuzukiSavage.com Rocks! Posts: 1268 Carterton,New Zealand Gender:	Re: Is it time for a Cam replacement? Reply #6 - 09/06/12 at 18:37:47 im sorry i didnt understand that??????
Back to top	IP Logged

paulmarshall Serious Thumper Offline SuzukiSavage.com Rocks! Posts: 1268 Carterton,New Zealand Gender:	Re: Is it time for a Cam replacement? Reply #7 - 09/06/12 at 18:39:03 but you would recommend getting it replaced?
Back to top	IP Logged

rfw2003 Serious Thumper Offline SuzukiSavage.com Rocks! Posts: 1108 Yantis, TX	Re: Is it time for a Cam replacement? Reply #8 - 09/06/12 at 18:42:30 If you can't get the verslagen1's modded cam chain adjuster, then you would either need to have yours modded locally or replace the cam chain. By far the easiest solution is to use a modded adjuster.
Back to top	1996 Savage, Corbin Seat, K&N filter, Slip Streamer Enterprise II windshield, LED bullet signals, Cat's eye LED tail light Ryca reverse cone long muffler IP Logged

Paraquat

Serious Thumper

Offline

SuzukiSavage.com
Rocks!

Posts: 2206

Re: Is it time for a Cam replacement?
Reply #9 - 09/06/12 at 19:04:25

http://suzukisavage.com/cgi-bin/YaBB.pl?board=tech;action=display;num=1191167029

Read that.

http://suzukisavage.com/cgi-bin/YaBB.pl?num=1180206459
Then find out more about it there.

V probably didn't want to advertise because he's jammed up and can't make any more at this second but those pages should at least tell you how to measure the chain.
Or he's a horrible salesman.

--Steve

IP Logged

paulmarshall Serious Thumper Offline SuzukiSavage.com Rocks! Posts: 1268 Carterton,New Zealand Gender:	Re: Is it time for a Cam replacement? Reply #10 - 09/06/12 at 19:36:41 Thank you all for your feedback
Back to top	IP Logged

justin_o_guy2 Serious Thumper Offline What happened? Posts: 55279 East Texas, 1/2 dallas/la.	Re: Is it time for a Cam replacement? Reply #11 - 09/06/12 at 22:28:31 rfw2003 wrote on 09/06/12 at 18:42:30: If you can't get the verslagen1's modded cam chain adjuster, then you would either need to have yours modded locally or replace the cam chain. By far the easiest solution is to use a modded adjuster. & in the long run, cheaper.
Back to top	The people never give up their liberties but under some delusion.- Edmund Burke. IP Logged

wambr

Serious Thumper

Offline

SuzukiSavage.com
Rocks!

Posts: 610
Russia, Samara
Gender: male

Re: Is it time for a Cam replacement?
Reply #12 - 09/06/12 at 23:11:09

similar was my motorcycle. thanks guys, as suggested here, on this website about the limit of the service! then I did so

.
thank you again! until i got a new camchain .
mileage was-a total of about 20000 , with this mod is still approximately 3000 miles. i could drive and a bit more, but I'm not to risk it and replaced camchain .

Yeah, it's not bigtwin, but it is the best half of it

IP Logged

Pages: 1

‹ Previous topic | Next topic ›

« Home