SuzukiSavage.com - Highway peg extenders

Welcome, Guest. Please Login or Register :: View Members

SuzukiSavage.com › General Category › Technical Documents/Reference › Highway peg extenders

(Moderators: verslagen1, Dave, Serowbot)

‹ Previous topic | Next topic ›

Pages: 1

Highway peg extenders (Read 323 times)

BOBD Full Member Offline Posts: 170 Blacklick, Ohio Gender:	Highway peg extenders 09/18/12 at 08:42:28 This is what I did. I extended my highway pegs out 4" with stainless 1/4" steel bar and stainless steel bolts. Could have gone to 5 or 6", but only did 4". It's fine for me. If you have really long legs you may want to go to 6".
Back to top	« Last Edit: 09/18/12 at 11:21:11 by BOBD » IP Logged

Pine Serious Thumper Offline SuzukiSavage.com Rocks! Posts: 1694 Mississippi, USA Gender:	Re: Highway peg extenders Reply #1 - 09/18/12 at 10:04:06 Nice! I just got my engine guards.. cant wait to try it out.
Back to top	IP Logged

BOBD

Full Member

Offline

Posts: 170
Blacklick, Ohio
Gender: male

Re: Highway peg extenders
Reply #2 - 09/18/12 at 11:30:08

These are my 6" extenders. Because the engine guards are angled I had angle the extenders outward to get them level. If I had a way to bend them that would be better, but since I only have a 31" inseam so they work fine for me.

Found a way to bend the extender, A sledge hammer and a bench vice. The front wheel looks like it is close, but there is plenty of room.

« Last Edit: 09/20/12 at 03:44:28 by BOBD »

IP Logged

BOBD Full Member Offline Posts: 170 Blacklick, Ohio Gender:	Re: Highway peg extenders Reply #3 - 09/26/12 at 10:07:31 Just modified the pegs to have a heel rest. They both fold up. I used some Buddy Footpegs by Bikemaster. Got them for $10 from here: http://www.cruisercustomizing.com/buddy-footpegs-10mm/part/BM-171250
Back to top	IP Logged

Pages: 1

‹ Previous topic | Next topic ›

« Home