SuzukiSavage.com - brake line

nateordie YaBB Newbies Offline impossible is nothing Posts: 37 Gender:	brake line 04/03/13 at 12:12:15 I swapped out my handlebars recently for clubmans and got bigger shocks for the back to raise up the rear to give my savage a different look. I now need a new shortened brake line. Ryca sells a 30 inch one for 75 dollars. Does anyone know of a place I can get one for cheaper? Thanks.
Back to top	IP Logged

Dave

YaBB Moderator
ModSquad

Offline

SuzukiSavage.com
Rocks!

Posts: 18314
Camp Springs, Kentucky
Gender: male

Re: brake line
Reply #1 - 04/03/13 at 13:30:39

You can get this one from Motorcycle Superstore for $ 35.99 plus shipping:
http://www.motorcycle-superstore.com/14/71/983/28909/ITEM/Streamline-Universa...

You can get this one from Vehnill in any color or length you want with chrome plated fittings for $ 41.98 plus shipping.
http://www.venhillusa.com/Venhill-Custom-Shop/Venhill-Braided-Stainless-Steel...

Or you can get the Venhill kit with stainless fittings for $ 59.98 plus shiping:
http://www.venhillusa.com/Venhill-Custom-Shop/Venhill-Braided-Stainless-Steel...

Most people use a 30" length - I used 31" with mine as I used a different master cylinder.

Back to top

Someday I will be old......But not today!

IP Logged

EJID Serious Thumper Offline Work to ride and ride to work. Posts: 1536 Pocatello, ID Gender:	Re: brake line Reply #2 - 04/03/13 at 14:00:22 I bought one from this guy off eBay...good quality product, you state the length you want and identify the fittings when you order it. Shipped from Canada, but I don't think it took very long to get here when I ordered mine. http://www.ebay.com/itm/SUZUKI-LS650PY-CUSTOM-STAINLESS-STEEL-BRAKE-LINE-HOSE...
Back to top	05 S40 15" Memphis Slim, FXDWG Bars, Moved Rear Signals, Saddlebags, Fork Bag, Mini-Tach, Raptor, Cone Filter, Fishtail Muffler, Mix Screw Out 2.5 Turns, 4" Fwd Controls, 147.5 Main/55 Pilot @ 4500 IP Logged

nateordie YaBB Newbies Offline impossible is nothing Posts: 37 Gender:	Re: brake line Reply #3 - 04/03/13 at 14:42:21 EJID, what fittings did you use?
Back to top	IP Logged

EJID

Serious Thumper

Offline

Work to ride and
ride to work.

Posts: 1536
Pocatello, ID
Gender: male

Re: brake line
Reply #4 - 04/03/13 at 14:59:21

nateordie wrote on 04/03/13 at 14:42:21:

EJID,
what fittings did you use?

Here is the note from my original order...

"Hose 1 Fittings #1 & #4 (10mm Straight & 10mm 45 Degree) Length 42" (end to end including fittings) Angle: Type C (90 Degree)"

I used this cable to extend my brake line for putting on mini-apes (from a FXDWG) and if I did it again, I would add another 1" in length (almost too short). It's been a while now, and I'm not sure if the Angle Type C is the correct one to use, seems like I had a little trouble with the angle, but I would have to look it over again to decide. I was happy with my purchase though and would use them again if I need another line.

Good luck

Back to top

05 S40 15" Memphis Slim, FXDWG Bars, Moved Rear Signals, Saddlebags, Fork Bag, Mini-Tach, Raptor, Cone Filter, Fishtail Muffler, Mix Screw Out 2.5 Turns, 4" Fwd Controls, 147.5 Main/55 Pilot @ 4500

IP Logged

nateordie YaBB Newbies Offline impossible is nothing Posts: 37 Gender:	Re: brake line Reply #5 - 04/03/13 at 15:01:17 EJID, Thanks!
Back to top	IP Logged

rfbznb Full Member Offline SuzukiSavage.com Rocks! Posts: 108 laurel lake, nj Gender:	Re: brake line Reply #6 - 04/03/13 at 18:29:13 I got this one and it took 6 days to get it I ordered with the fitting below and it fits great it was for taller and wider bars oem is 42" http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&vxp=mtr&item=271171183195 1) 47 inches 2) fitting G and H 3) black color brake hose 4) type C
Back to top	IP Logged

nateordie YaBB Newbies Offline impossible is nothing Posts: 37 Gender:	Re: brake line Reply #7 - 04/03/13 at 23:25:58 Thanks for the feedback everyone! Much appreciated.
Back to top	IP Logged

Cavi Mike Serious Thumper Offline Thumper n00b Posts: 1005 Rochester, NY Gender:	Re: brake line Reply #8 - 04/05/13 at 07:19:55 I got some brake lines for my old Corolla from this guy. They look real nice. I actually didn't know he makes them himself - they look like store-bought items.
Back to top	IP Logged

verslagen1

YaBB Moderator
ModSquad

Offline

Where there's a
will, I want to be
in it.

Posts: 28996
L.A. California
Gender: male

Re: brake line
Reply #9 - 04/05/13 at 08:35:36

EJID wrote on 04/03/13 at 14:59:21:

[quote author=383722333924323F33560 link=1365016335/0#3 Here is the note from my original order...

"Hose 1 Fittings #1 & #4 (10mm Straight & 10mm 45 Degree) Length 42" (end to end including fittings) Angle: Type C (90 Degree)"

I used this cable to extend my brake line for putting on mini-apes (from a FXDWG) and if I did it again, I would add another 1" in length (almost too short). It's been a while now, and I'm not sure if the Angle Type C is the correct one to use, seems like I had a little trouble with the angle, but I would have to look it over again to decide. I was happy with my purchase though and would use them again if I need another line.

Good luck

I believe I got angle C = 0° and had trouble with it also.
I ordered clear covering, but that doesn't last too long.
If I order again, it'll be black.

Back to top

Versey's Place
Tech Section Index

IP Logged