SuzukiSavage.com - Porting the exhaust

Donate!

Welcome, Guest. Please Login or Register :: View Members

SuzukiSavage.com › General Category › Rubber Side Down! › Porting the exhaust

(Moderators: verslagen1, Dave, Serowbot)

‹ Previous topic | Next topic ›

Pages: 1

Send Topic

Print

Porting the exhaust (Read 101 times)

paulmarshall Serious Thumper Offline SuzukiSavage.com Rocks! Posts: 1268 Carterton,New Zealand Gender:	Porting the exhaust 05/18/13 at 12:42:43 I understand that when removing metal it should be done evenly. However when it comes to the Savage we are limited because of design. In this case can the exhaust be ported more where I have illustrated with the red lines in pic. Can it be a oval?
Back to top	Exhaust_Port_21.jpg IP Logged

LANCER Serious Thumper Alliance Member Offline Savage Beast Performance Parts Posts: 10801 Oklahoma Gender:	Re: Porting the exhaust Reply #1 - 05/18/13 at 15:37:13 I did mine in somewhat of a D shape, with the bottom being the flat side of the D.
Back to top	IP Logged

verslagen1 YaBB Moderator ModSquad Offline Where there's a will, I want to be in it. Posts: 28996 L.A. California Gender:	Re: Porting the exhaust Reply #2 - 05/18/13 at 18:47:28 there's a couple of links in here... http://suzukisavage.com/cgi-bin/YaBB.pl?num=1291516932
Back to top	Versey's Place Tech Section Index IP Logged

Pages: 1

Send Topic

Print

‹ Previous topic | Next topic ›

« Home