Home
Forum
Search
Login
Register
Merch
Donate
Welcome, Guest. Please
Login
or
Register
::
View Members
SuzukiSavage.com
›
General Category
›
Rubber Side Down!
› New oil leak after re-jetting and other mods
(Moderators:
verslagen1
,
Dave
,
Serowbot
)
‹
Previous topic
|
Next topic
›
Pages: 1
New oil leak after re-jetting and other mods (Read 91 times)
RangerRide
YaBB Newbies
Offline
SuzukiSavage.com
Rocks!
Posts: 18
New oil leak after re-jetting and other mods
07/28/14 at 18:27:54
2006 with 6,000 miles...500 are mine
Last weekend I re-jetted the carb: 155 main, 52.5 Pilot, and 3 washers courtesy of Lancer. I also swapped the spark plug with an iridium plug, UNI foam air filter, and EMGO turn out muffler. I have been running Rotella T6 Synthetic. The bike is running much better with noticeable more power.
Took the bike out for about 15 minutes after I finished and no oil leak. Took it out a second time for about 45 minutes and now there is a slow drip of oil from two spots. More so after riding then slows down after cooled off. I'm new to tinkering and am not sure what to call where it is coming from so I have attached pics. Where you see the drips is where it is coming from. I looked all around and above that spot and no trace of oil.
[img][/img]/Users/Erin/Downloads/attachments_2014_07_29-2/photo 1.JPG
Back to top
photo_1_005.JPG
IP Logged
RangerRide
YaBB Newbies
Offline
SuzukiSavage.com
Rocks!
Posts: 18
Re: New oil leak after re-jetting and other mods
Reply #1 -
07/28/14 at 18:33:58
Sorry first time posting pics
Back to top
photo_2_003.JPG
IP Logged
RangerRide
YaBB Newbies
Offline
SuzukiSavage.com
Rocks!
Posts: 18
Re: New oil leak after re-jetting and other mods
Reply #2 -
07/28/14 at 18:34:44
2nd leak
Back to top
photo_3_001.JPG
IP Logged
RangerRide
YaBB Newbies
Offline
SuzukiSavage.com
Rocks!
Posts: 18
Re: New oil leak after re-jetting and other mods
Reply #3 -
07/28/14 at 18:35:30
1st
Back to top
photo_4_002.JPG
IP Logged
RangerRide
YaBB Newbies
Offline
SuzukiSavage.com
Rocks!
Posts: 18
Re: New oil leak after re-jetting and other mods
Reply #4 -
07/28/14 at 18:36:12
2nd
Back to top
photo_5.JPG
IP Logged
RangerRide
YaBB Newbies
Offline
SuzukiSavage.com
Rocks!
Posts: 18
Re: New oil leak after re-jetting and other mods
Reply #5 -
07/28/14 at 18:44:22
This is after about 3 days of sitting.
Also forgot to mention that I removed the air box and I have the Raptor Petcock to put on this weekend.
Back to top
photo_1_006.JPG
IP Logged
Oldfeller--FSO
Serious Thumper
ModSquad
Offline
Hobby is now
"concentrated
neuropany"
Posts: 12686
Fayetteville, NC
Gender:
Re: New oil leak after re-jetting and other mods
Reply #6 -
07/28/14 at 18:46:56
What did you do with your puke tube, the big one coming from the head?
Back to top
Former Savage Owner
IP Logged
RangerRide
YaBB Newbies
Offline
SuzukiSavage.com
Rocks!
Posts: 18
Re: New oil leak after re-jetting and other mods
Reply #7 -
07/28/14 at 18:59:24
I added a small breather filter to it. I haven't figured out where to route it to yet so I just placed it as close as I could to where it was originally.
Back to top
IP Logged
1st2know
Senior Member
Offline
Currently between
Savages
Posts: 295
Seattle, WA
Gender:
Re: New oil leak after re-jetting and other mods
Reply #8 -
07/28/14 at 19:06:14
When you take the front pegs loose to remove the exhaust, you can expect a temporary leak. tightening the peg/motor mount bolts down should have fixed it, you might just be seeing residual oil from loosening those bolts that's oozing down as your ride it.
Clean it up, check on it every other day to see if it's still leaking.
Back to top
Kaw VN1700, V-Strom 650, Coal powered Chevy Spark.
IP Logged
RangerRide
YaBB Newbies
Offline
SuzukiSavage.com
Rocks!
Posts: 18
Re: New oil leak after re-jetting and other mods
Reply #9 -
07/28/14 at 19:35:03
Thanks, I just went out to tighten them and they wouldn't grab just kept turning. Figured it wouldn't be a good idea to keep going. It is coming from the left side of the bike so I hadn't removed it before to change the exhaust.
Back to top
IP Logged
1st2know
Senior Member
Offline
Currently between
Savages
Posts: 295
Seattle, WA
Gender:
Re: New oil leak after re-jetting and other mods
Reply #10 -
07/28/14 at 19:57:17
Yeah, you need to have a wrench on both sides. I use a ratchet on the left side so when I turn it from the right side, the ratchet handle gets blocked up and holds the bolt in place.
Looks like you found the leak.
edit: I use a ratchet on the left side, box wrench on the right.
Back to top
Kaw VN1700, V-Strom 650, Coal powered Chevy Spark.
IP Logged
Dave
YaBB Moderator
ModSquad
Offline
SuzukiSavage.com
Rocks!
Posts: 18314
Camp Springs, Kentucky
Gender:
Re: New oil leak after re-jetting and other mods
Reply #11 -
07/29/14 at 05:08:27
Yep, grab some wrenches and tighten your engine mount bolts.....it is a through bolt and you will need a wrench/socket on both sides to tighten it.
Dave
Back to top
Someday I will be old......But not today!
IP Logged
RangerRide
YaBB Newbies
Offline
SuzukiSavage.com
Rocks!
Posts: 18
Re: New oil leak after re-jetting and other mods
Reply #12 -
07/29/14 at 16:40:14
Thanks, tightened it last night and cleaned it up... so far no oil.
Back to top
IP Logged
Pages: 1
‹
Previous topic
|
Next topic
›
Forum Jump »
» 10 most recent posts
» 10 most recent topics
General Category
»» Rubber Side Down!
- Technical Documents/Reference
- The Marketplace
- The Cafe
- Politics, Religion (Tall Table)
- Forum Upgrade Issues / Tests
« Home
« Home
SuzukiSavage.com
05/15/25 at 13:30:06
›
General Category
›
Rubber Side Down!
› New oil leak after re-jetting and other mods
SuzukiSavage.com
» Powered by
YaBB 2.2
!
YaBB
© 2000-2007. All Rights Reserved.