SuzukiSavage.com - Rough clutch

Welcome, Guest. Please Login or Register :: View Members

SuzukiSavage.com › General Category › Rubber Side Down! › Rough clutch

(Moderators: verslagen1, Dave, Serowbot)

‹ Previous topic | Next topic ›

Pages: 1 2

Rough clutch (Read 201 times)

smokin_blue

Serious Thumper

Offline

From Cafes to
Streetfighters! I
build them all!

Posts: 830
St. Paul, MN
Gender: male

Re: Rough clutch
Reply #15 - 12/18/14 at 16:14:51

http://suzukisavage.com/yabb2.2/Attachments/clutch_pulley.jpg

Take a look at the cable in this picture. reach in and hook it with your finger and pull outward. Wiggle the bottom a little if you need to but you should see a little of the head of the cable poke up through the metal link that is at the bottom of the cable. The way it sits now looks like way too much slack. If this doesn't make sense let me know and I will try to go take a picture of mine.

My website http://street-unique.com

IP Logged

Steve H Serious Thumper Offline SuzukiSavage.com Rocks! Posts: 1223 Spartanburg, SC Gender:	Re: Rough clutch Reply #16 - 12/18/14 at 17:57:37 If nobody said anything about it yet, to get the nuts loose, put a wrench on B and put a wrench on C and rotate them opposite directions. Looking downward toward them the way they are installed, turn C clockwise and B anti-clockwise. The one nut locks the other in place so they don't move from the vibrations.
Back to top	« Last Edit: 12/19/14 at 03:38:30 by Steve H » 87 LS650, 2005 Ninja 250, 2009 Yamaha C3, 2001 Honda Reflex. On 2 wheels since 6/80. IP Logged

Pages: 1 2

‹ Previous topic | Next topic ›

« Home