SuzukiSavage.com - Getting back on the horse

ihasabike

Full Member

Offline

^^ihasapicofit!

Posts: 121

Getting back on the horse
03/13/15 at 04:12:22

I had a couple of issues with my S40.

For example, last season I found it really frightening to ride on the interstate because every time I crossed an angled seam in the pavement it made the bike fishtail or weave briefly in a scary way. So I am reluctant to take it on road trips that involve interstates or freeways. Is there anything I can do to make it handle better, like upgrade the shocks, maybe?

Also, getting it ready for the season, we noticed an oil leak, and our mechanic says it needs a head gasket, which is an expensive repair. He said that this is a known issue with this model, and there is no way to prevent it. Should I expect an expensive repair every year, then?

Finally, I injured my left hand last year and had to have a bone graft. My hand is still sore and it hurts to pull the clutch in and hold it. Are there other clutch options I can consider?

Back to top

K/N Filter; Tachometer; Raptor Petcock; Engine Guard; Highway Pegs; Windshield; GT Grips; Shot Filled Dragbars; Saddle Bags and Supports; 12V Outlet

IP Logged

Dave

YaBB Moderator
ModSquad

Offline

SuzukiSavage.com
Rocks!

Posts: 18314
Camp Springs, Kentucky
Gender: male

Re: Getting back on the horse
Reply #1 - 03/13/15 at 04:24:06

Tires are more an issue with "tramming"....the desire of the bike to follow pavement seams and irregular surfaces. New tire designs have wavy tread grooves to help prevent this....straight grooves in the tires tend to follow pavement grooves. Tire pressure can affect this, as can irregular wear in tires. You might be ready for a new set of tires.

The Savage does not blow head gaskets...it is a low compression engine and does not stress that area. We have never seen a blown head gasket on this forum. You most likely have a rubber head plug leak, which is very common.

http://suzukisavage.com/cgi-bin/YaBB.pl?num=1256079122

I can't think of any clutch options that would help on the Savage. You might be able to bend the lever to reduce the reach a little bit - but the lever does need most of the available travel to function properly. Maybe taking the clutch lever apart and cleaning and lubing the pivot bolt, and a thorough lubing of the clutch cable will help. There are cable lubers you can buy that will force the lube down the cable, Oldfeller pokes a hole in a baggy and secures it to the top of the cable and puts oil in the baggy...then lets gravity flow the oil down the cable over a couple of days.

Back to top

Someday I will be old......But not today!

IP Logged

ihasabike Full Member Offline ^^ihasapicofit! Posts: 121	Re: Getting back on the horse Reply #2 - 03/13/15 at 04:54:06 Thanks. Maybe I misunderstood the mechanic. I thought he said gasket. I will check with him. If it is the head gasket, is it possible the previous owner did something that could have led to this issue? It was outfitted as a drag bike when I bought it. Do people ever use nitrous in these?
Back to top	K/N Filter; Tachometer; Raptor Petcock; Engine Guard; Highway Pegs; Windshield; GT Grips; Shot Filled Dragbars; Saddle Bags and Supports; 12V Outlet IP Logged

Dave

YaBB Moderator
ModSquad

Offline

SuzukiSavage.com
Rocks!

Posts: 18314
Camp Springs, Kentucky
Gender: male

Re: Getting back on the horse
Reply #3 - 03/13/15 at 05:04:04

ihasabike wrote on 03/13/15 at 04:54:06:

Thanks.

Maybe I misunderstood the mechanic. I thought he said gasket. I will check with him.

If it is the head gasket, is it possible the previous owner did something that could have led to this issue? It was outfitted as a drag bike when I bought it. Do people ever use nitrous in these?

No reason to use Nitrous that I can see. If they did use Nitrous.....the clutch and drive belt will give out long before the head gasket does.

If he keeps saying head gasket....you need to find someone that works on the Savage regularly and get a second opinion.

Back to top

Someday I will be old......But not today!

IP Logged

Gary_in_NJ

Serious Thumper

Offline

LS650 Cafe Racer

Posts: 2642
Amongst the Twisty Roads

Re: Getting back on the horse
Reply #4 - 03/13/15 at 05:11:17

Dave is 100% correct on tires and tram-lining. But I have another thought on your uneasiness and how it can lead to spooky handling...

Be careful of the "death grip" while riding. The death grip happens when the rider gets tense or panics and normal inputs to the bars (for counter steering) and movement on the bike becomes restricted. A "frozen" rider will actually fight with the bike as it attempts to naturally traverse a varied surface.

If you are anticipating that crossing an angled seam in the road will create a spooky feeling, then I can almost guarantee that it will. Loosen up and just go with it. You'd be amazed at how well a bike handles without undue rider input.

Back to top

A life-time student of motorcycling.
LS650 Cafe, DRZ400SM, FZ6N, SV650S, CB900C, Ducati ST2, CB550F-SS
My LS650=> http://suzukisavage.com/yabb2.2/Attachments/Left.JPG

IP Logged

jcstokes Serious Thumper Offline SuzukiSavage.com is very useful Posts: 2142 Mauku New Zealand Gender:	Re: Getting back on the horse Reply #5 - 03/13/15 at 12:13:42 Your avatar pic shows a pretty new bike, Are you still on the original IRC tyres? When I first brought mine new the fish tailing, tramming scared me. A decent rear tyre solved the problem immediately, there will be plenty of advice here on good tyres. Most people here hold the IRC"s in low esteem.
Back to top	Completely stock 2010 S40, aftermarket rev counter and back pack, Airhawk seat pad IP Logged

Ed L.

Serious Thumper
Alliance Member

Offline

"We All go a
Little Crazy
Sometimes"
Norman Bates

Posts: 2808
Sunny Florida
Gender: male

Re: Getting back on the horse
Reply #6 - 03/13/15 at 16:23:07

Stock tires will make the bike feel unstable at superslab speed as well as wrong tire pressure, you might want to look into a fork brace, it helped a lot on my '02. The head plug oil leak is common but no big deal, what year is your bike and how many miles on it?
Watch out for the "death grip" on the handle bars, a gentle touch will make a big difference.

Back to top

Silver '02, clubman handle bars, Cobra headlight, Sportster muffler, K+N stock air filter, 152.5 main, Superbrace, oil cooler, 1/2 inch aluminium plate forward controls, spark advance, goes like stink

IP Logged

Kenny G

Serious Thumper

Offline

SuzukiSavage.com The
Singles Club...LOL

Posts: 1754
Robson Ranch, Denton, Texas
Gender: male

Re: Getting back on the horse
Reply #7 - 03/13/15 at 22:04:46

The Tkat fork brace on my 2013 S40, with the original IRC tyres, really helped with the front end following the road rather than the grooves in the road.

Within a couple of week after installing the Tkat I acquired an air compressor, between properly inflated tires and the fork brace the handling couldn't be better for this style motorcycle.

Kenny G

Back to top

IP Logged

atomikchicken Ex Member	Re: Getting back on the horse Reply #8 - 03/14/15 at 00:39:56 Internal clutch may help. http://www.viciouscycleworks.us/khxc/ccp0-prodshow/eu_5.html http://www.garageinc.net/throttle.html http://www.custom-motorcycle-parts.com/parts/throttle-assembly-internal-throt...
Back to top	IP Logged

Dave YaBB Moderator ModSquad Offline SuzukiSavage.com Rocks! Posts: 18314 Camp Springs, Kentucky Gender:	Re: Getting back on the horse Reply #9 - 03/14/15 at 03:00:39 The internal clutch that atomikchicken listed is an interesting option. It would require new handlebars (no big deal), as the stock bars have a big hunk of steel in each end to help reduce vibration in the handlebars.
Back to top	Someday I will be old......But not today! IP Logged

justin_o_guy2 Serious Thumper Offline What happened? Posts: 55279 East Texas, 1/2 dallas/la.	Re: Getting back on the horse Reply #10 - 03/14/15 at 06:19:58 Stay AWAY from that mechanic..
Back to top	The people never give up their liberties but under some delusion.- Edmund Burke. IP Logged

ihasabike

Full Member

Offline

^^ihasapicofit!

Posts: 121

Re: Getting back on the horse
Reply #11 - 03/14/15 at 12:36:08

He confirmed it was the head gasket and when I told him what you guys said, he replied that he gets 3 or 4 head gasket jobs a year on this model. He said it's the Texas heat, and people riding on the highway in high heat long distances with the throttle wide open, or sitting at long lights with the engine running. He also said he puts some special lubricants on it to handle the heat better when he does them and he has never had a repeat.

It is a 2012 model with almost 3.5k miles on it.

Back to top

K/N Filter; Tachometer; Raptor Petcock; Engine Guard; Highway Pegs; Windshield; GT Grips; Shot Filled Dragbars; Saddle Bags and Supports; 12V Outlet

IP Logged

justin_o_guy2 Serious Thumper Offline What happened? Posts: 55279 East Texas, 1/2 dallas/la.	Re: Getting back on the horse Reply #12 - 03/14/15 at 14:34:56 Do a compression check? Just exactly what are the symptoms? The oil leak is common. He is right on that.. But I've been here long enough to see hundreds of new riders come and go. I don't remember a single head gasket. I'm aware of 2 motors destroyed by dealerships.
Back to top	The people never give up their liberties but under some delusion.- Edmund Burke. IP Logged

pg

Serious Thumper

Offline

Posts: 5274
In Transit

Re: Getting back on the horse
Reply #13 - 03/14/15 at 15:19:29

ihasabike wrote on 03/14/15 at 12:36:08:

He confirmed it was the head gasket and when I told him what you guys said, he replied that he gets 3 or 4 head gasket jobs a year on this model.

Do you know this mechanic well? My initial thoughts are they do not know what they are taking about or they are full of crap looking for a reason to justify an expensive bill.

Best regards,

Back to top

I don't make the rules, I just know what they are.....

IP Logged

justin_o_guy2

Serious Thumper

Offline

What happened?

Posts: 55279
East Texas, 1/2 dallas/la.

Re: Getting back on the horse
Reply #14 - 03/14/15 at 15:40:12

3,500 miles,, blown head gasket,,, or, leaking head plug.

Which one is common?
How many times have we Stopped someone from paying for a head gasket job ? At least 10..

Ever seen a blown head gasket on anything? If it's busted then the pressure of compression is going somewhere... you feel it? Hear it?

Oil Plug,, not head gasket,,
You're about to get screwed,, and the mechanic may actually believe it has a bad head gasket,, but I don't believe that.

Back to top

The people never give up their liberties but under some delusion.- Edmund Burke.

IP Logged