SuzukiSavage.com - 2015 Boulevard Handle bar QUESTION

Welcome, Guest. Please Login or Register :: View Members

SuzukiSavage.com › General Category › Rubber Side Down! › 2015 Boulevard Handle bar QUESTION

(Moderators: verslagen1, Dave, Serowbot)

‹ Previous topic | Next topic ›

Pages: 1

2015 Boulevard Handle bar QUESTION (Read 128 times)

Simbaco

YaBB Newbies

Offline

SuzukiSavage.com
Rocks!

Posts: 6

2015 Boulevard Handle bar QUESTION
11/28/16 at 19:25:09

Hello,First post here after reading many posts! Most if not all my questions/ worries have been answered here.
So I have a 2015 Suzuki S40Boulevard.
I am planning on changing my handle bars to
some real simple Z bars with a 6in rise. (On ryca website)
So my question is: with these bars and the OEM 2in risers will ALL my lines reach/ fit?
I have read on this forum that anything under 10in will reach, but it just seems like the wires/ lines on my bike don't have very much slack remaining.
Thank you all for your help!

IP Logged

Yoshi Serious Thumper Offline SuzukiSavage.com Rocks! Posts: 880 LongIsland, N.Y. Gender:	Re: 2015 Boulevard Handle bar QUESTION Reply #1 - 11/28/16 at 19:33:06 The older savages that came with buckhorn handlebars have longer cables then the new savages "s40"
Back to top	IP Logged

Simbaco YaBB Newbies Offline SuzukiSavage.com Rocks! Posts: 6	Re: 2015 Boulevard Handle bar QUESTION Reply #2 - 11/28/16 at 19:37:51 I kind of figured, especially after looking up photos of other bikes. So does anyone know if these bars will fit? And if not how can I go about getting lines that reach?
Back to top	IP Logged

LANCER Serious Thumper Alliance Member Offline Savage Beast Performance Parts Posts: 10801 Oklahoma Gender:	Re: 2015 Boulevard Handle bar QUESTION Reply #3 - 11/29/16 at 07:05:19 You can get custom cables/lines but the cost is $200+ for all 3 in black vinyl, more if you want braided stainless, etc.
Back to top	IP Logged

ohiomoto Serious Thumper Offline SuzukiSavage.com Rocks! Posts: 2825	Re: 2015 Boulevard Handle bar QUESTION Reply #4 - 11/29/16 at 07:14:19 If you need longer cables I have a good set off an 87 listed in the classifieds. I may even interested in trading for your shorter cables.
Back to top	IP Logged

norm92de Serious Thumper Offline SuzukiSavage.com Rocks! Posts: 1180 El Paso TX Gender:	Re: 2015 Boulevard Handle bar QUESTION Reply #5 - 11/30/16 at 14:13:53 When I lowered my 2014 handlebars 2'' the main reason for only 2'' was the cable and front brake lengths. Also the bars come very close to the tank if you go too far. Hope this helps.
Back to top	2014 S40. Raptor. idle mixture adj.Needle raised one notch. 4000' altitude. Stock jets. Shell Rotella synthetic. IP Logged

Mr.T Junior Member Offline SuzukiSavage.com Rocks! Posts: 55 Tega Cay, SC Gender:	Re: 2015 Boulevard Handle bar QUESTION Reply #6 - 12/01/16 at 18:05:15 Simbaco - sent you a PM
Back to top	Old age and treachery will overcome youth and skill IP Logged

Simbaco YaBB Newbies Offline SuzukiSavage.com Rocks! Posts: 6	Re: 2015 Boulevard Handle bar QUESTION Reply #7 - 12/03/16 at 14:45:56 Thank you everyone! Anyone that has longer cable/ lines they want to sell/ trade please email me @ garythompson9@yahoo.com the website will not let me message users? Will also be willing to trade/ sell my bars.
Back to top	IP Logged

Pages: 1

‹ Previous topic | Next topic ›

« Home