https://e-catworld.com/2021/08/02/rossi-very-positive-progress-with-the-e-cat...

Rossi just got hit with a line of questioning that he tried to dodge, but 3 posters held him to it until he yielded up some information.

The Rossi nested double glow plasma reactor system naturally puts out UV radiation, as do Mills sun cells and all the others.

You know that our normal plain Jane florescent light bulbs operate off generated UV frequencies with photons that hit phosphor particles that coat the inside of the bulb.   The individual phosphor particle then puts out a white light phosphor photon to release the input UV photon amount of energy.

IF this is indeed the Rossi light's secret, then it is a very low power inherently safe item and very simple and very cheap to build.

People got it in their heads that the Rossi light used generated DC electricity to run a big complex LED simply because Rossi was working on electricity generation at the time, but that was pure peanut gallery conjecture that Rossi simply permitted to stand.  

No, the entire thing constitutes a big plasma driven LED glow bulb with a phosphor coating on the inside of the bulb.

Support for this theory also comes from yesterday's post.   Rossi is saying his electric generation is getting better, but isn't ready for prime time.   Since his power generation isn't ready but his light is, then the light probably operates off something other than generated electricity.

Anonymous
August 1, 2021 at 10:21 AM
Dear Andrea,
How is proceeding the R&D on the SKL ?

Andrea Rossi
August 1, 2021 at 10:31 AM
Anonymous:
Also today has been very positive. We are making progress.
Warm Regards,
A.R.

Frank Acland
August 1, 2021 at 8:47 PM
Dear Andrea,

Congratulations on the progress with the Ecat SKL!

1. Would you classify the progress you have recently made with the SKL as a ‘breakthrough’?
2. What do you think the probability is now that you will present the SKL on November25?

Andrea Rossi
August 2, 2021 at 3:02 AM
Frank Acland:
1. yes
2. not impossible
Warm Regards,
A.R.

I do think that with a major public event scheduled for November 25th, that Rossi will be working and hoping to get the SKL to a level where he can present it to the world, along with the Ecat SKLed lamp, but I don’t think he will do it unless he feels it is ready. So with November only three months away, I think there will be frenetic activity among Rossi’s team to continue to resolve problems. I hope he makes it.




https://e-catworld.com/2021/08/03/rossi-skl-breakthrough-improves-reliability...

ONE WEEK LATER:     Rossi now claims to have made progress on the power generating SKL, making it good enough to slowly re-charge and to concurrently partially power an electric automobile.

This is big.   Think of it just in VERY limited terms as a range booster, it is still big.

Think of it in terms of a "live in a continuously powered off grid RV" and it is even bigger.

Well, it's on boys and girls ----- this Thanksgiving the tiny little light may be joined on the stage by the not so tiny electric generator.

‘Important Decision’ Rests Upon a ‘Crucial’ E-Cat SKL Test on Thursday, August 5th
Posted on August 5, 2021 • 7 Comments
Late on Wednesday, August 4th, Andrea Rossi made this interesting post on the Journal of Nuclear Physics regarding the work he has been doing on the E-Cat SKL electricity generator:

Andrea Rossi
August 4, 2021 at 11:51 AM
Mark U:
De Grasse made a great job !
Also the Ecat SKL did a great job today. Tomorrow we will make a crucial test, after which some important decision will be made.
Yesterday we were close, today we are very close, tomorrow has to be seen. As the gitan violinist of the masterpiece movie “The Concert” of Radu Mihaileanu says: ” …now it is evening, and the sun is not rising, but tomorrow will be morning and the sun will rise”
Warm Regards,
A.R.
P.S.
Thank you for your sustain to Italian athletes

“Tomorrow”, would refer to Thursday, August 5th. I wonder if the ‘important decision’ will be connected with whether to prepare a SKL product to show at the November presentation in Sweden. I think that Rossi will let us know as much as he can, as soon as he can. He is obviously very excited about the prospect of having a reliable SKL generating electricity, which seems to be his ultimate commercial goal.


"Physicist
August 5, 2021 at 1:49 AM
Dear Dr Rossi,
Please tell us how has gone the super test of today and if you will present the Ecat SKL too on November 25th in Stockholm,
Physicist

Andrea Rossi
August 5, 2021 at 1:39 PM
Physicist:
The test has been perfect.
It is now likely that on November 25th we will present also the Ecat SKL.
Warm Regards, A.R."

On JONP:
(just questions and answers)

1. Is it correct to say that the eCat SKL can be seen as a kind of super batterie, since it can power itself up delivering power for others?
AR: yes
2. In mass production are you planning a one-size-fits-all version first, or different versions for different type of applications?
AR: yes
3. Could a plug-in a fridge immediately?
AR: yes
4. Is it stable enough to be used on the move, i.e. to be used in a car, to serve as a power supply for the electronic parts?
AR: yes
5. Is it now in principle stable enough to replace the batterie of an electronic car?
AR: I think so

Q: Can you give some insight into the testing of the SKL that made such a big improvement?
AR: The merit is almost totally of the improvement of the A.I., because it has resolved all the core problems we had.


==================================================


Brice
August 7, 2021 at 11:33 AM
Dear Dr. Rossi,

Congratulations! This really is FANTASTIC!!! It’s worth waiting so long while now it can produce resistive and inductive load! A masterpiece that you probably didn’t expect yourself ten years ago! A blessing for humanity!

1. Will the SKL produce enough electricity for a moderate home?

AR: the modules will be assemblable to fill any necessity of power

2. Will it also need a time to start-up? Less than a minute?

AR: seconds

3. Can it run idle without any load?

AR: yes

4. Does it still need the net for excess electricity?

AR: depends on the situations

5. Is the electric output modifiable and flexible on demand?

AR: yes

6. When can we place pre-orders?

AR: premature, probably I will be ready to give this information during the presentation

Once again congratulations, great job!

Brice

Italo R.
August 7, 2021 at 12:33 PM
Dear Dr. Rossi,
I have ordered 20 ECat SKLed flashlights and am wondering if they will be self-powered (like ECAT SKL).
It would be wonderful to have “eternal” torches that shed light without requiring external power.

AR: The Ecat SKL will be able to fuel also the Ecat SKLed

Gerard McEk
August 8, 2021 at 3:47 AM

Can the SKLed be made such that it will be self sustaining and if so would you be prepared to make them self sustaining?

AR: No

Rinus
August 7, 2021 at 10:29 AM
Dear Andrea,

You missed this one, so I repost:

Some people interpreted your answer to one of my questions in a different way than I did.
From your answers it is clear that an eCat can power a chain of other eCats.

1. But can one eCat start itself such that runs in self sustained mode?

AR: no, the start must be done by an external source

2. Will you demonstrate this in November?

AR: yes

Patrick
August 7, 2021 at 8:04 PM
Dear Andrea,

Congratulations on your latest progress.

Regarding the “AI” terminology that you use, does this mean that the SKL comes with a specialised AI microchip processor inside it?

AR: yes, also.

Calle H
August 7, 2021 at 2:46 AM
Dear Dr. Rossi,
In your reply to Walt C you indicate there is a charge to be replaced in the SKL. As there is no charge to be replaced in the SKLed is it correct that the SKL and the “power” unit in the SKLed is not the same technology?

AR: Correct

Same AI Control breakthrough that fixed the SKL Electric also fixed the SK "heat only" versions.

Ecat SK Heat for Industry Re-announced

Leonardo Corporation has developed a revolutionary heating technology: the Ecat SK. This technology stands on 20 years of research and development, and is based on an innovative way to apply the physics of the electron (see a theoretical explication here). Ecat SK heating can produce temperatures suitable for most current industrial process without producing carbon emissions or ionizing radiation. The Ecat SK is therefore is a safe, clean heating technology, perfectly suited for industries who are seeking to cut costs, and also reduce negative impacts on the environment.

Ecat SK heating is provided by Leonardo Corporation as a service, rather than a product. In other words, Leonardo installs the Ecat SK heating technology and retains ownership of it, while the customer pays a fee for the heat consumed.

Ecat SK heating is very versatile and can be used in many industrial applications, and can operate at a wide range of temperatures.

A few examples of suitable industrial uses of Ecat SK heat are:

Food and drink production
Cement production
Space heating
Laundry services
Petroleum refining
Paper making
Drying facilities
Power stations (driving turbines)

Leonardo Corporation is seeking to establish business relationships with industrial customers who would like to incorporate Ecat SK heating into their operations. If you are interested in discussing this with us, please complete the form below. We will respond promptly.


Existing SK units are fairly large relative to the other examples of Rossi Tech up on the Thanksgiving display table.

But, to thoroughly upstage Mills they will apparently be part of the presentation this Thanksgiving.

Rossi: E-Cat SKL Maximum Operation in Self-Sustained Mode So Far has been 24 Hours
Posted on August 18, 2021 • 16 Comments

Here’s an interesting Q&A between Gerard McEk and Andrea Rossi from the Journal of Nuclear Physics today:

Gerard McEk
August 18, 2021 at 3:57 AM
Dear Andrea,
It is good to hear that the SKL is still working well.
Some questions to keep us informed, if I may:
1. Is the SKL continuously operating in SSM, so not connected to any external power source?
2. What is the longest duration that it is in SSM until now?
3. You have said that even while it is vacation time, you continue working on the SKL. Can you give us an impression what is still needed to do before the presentation on 11/25?
I wish you great progress and success in the preparation.
Kind regards, Gerard

Andrea Rossi
August 18, 2021 at 6:38 AM
Gerard McEk:
1- yes
2- 24 hours
3- many things, long and confidential list
Thank you for your sustain,
Warm Regards,
A.R.

It is good to learn that SSM (self-sustain mode) means that the E-Cat SKL is not connected to an external power source when it is in operation. We don’t know how many watts it is producing, but producing even 100 W with no input for 24 hours would be very impressive.

As far as presenting the SKL at the November event goes, a live demonstration of this kind of long run will not be possible to do, but maybe something can be shown to demonstrate that SKL is producing more energy than is possible from a battery pack of similar size.


Further questions showed the real meaning of the 24 hours that are mentioned above.   Rossi routinely resets his SSM mode at 24 hours on all his power generating systems,  this was a programming decision made long ago in support of the earlier pre-existing nanny states regulatory requirements.

Rossi states there are some exterior imposed "regulatory issues" that preclude him from being able to make systems that will self-run for more than 24 hours by themselves, i.e.  systems that undo the mains controlled "exterior shut ability by the utility company's computer control systems".

The basic legal regulations of power generating systems that exist now in the EU nanny states will have to be legislatively updated and modified to allow for the self-charging cars of tomorrow and for the toolbox sized generators that can actually run a household.   Right now most EU nanny states with all their street cameras and such want to be able to shut down a building at will remotely.  

Rossi's stuff intentionally does not go against this socialist nanny state preference .......

They all know they have  https://days.to/nov25  days until Rossi presents his stuff, so they are all working very hard and making as many patents, announcements and various claims as they can get in before then.

That three story lab is slam full of 192 huge power sucking lasers is actually competing in the bigger output range with Mills, not with Rossi.    Mills is far far more advanced than these guys .......

They are fighting for their very funding existence, as when Rossi is demonstrated and the facts he gives out are verified and accepted their funding will shortly dwindle away.

Rossi will announce and promote the little light for indoor veggie gardening.

If it is tuned so it suits the needs of the salad growers and the pot farmers he will get his million lights ordered at his low initial price.   If not, then he will need to announce a new price based upon what numbers of orders he does have.

The little generator will be looked at closely and a few customers will step forward to visit Rossi's lab for some in depth testing.   This all needs to be re-packaged for the owner to be able to easily swap out the charges.   This needs to look and perform like a competitive generator product as far as ease of use goes.  Rossi needs to lose the 25 minute reboot period thing completely and have his unit run continuously without interruption.

His major sized steam heat arrangement needs to be sold, not leased.  What he sells needs to be packaged for the commercial owner's maintenance people to be able to easily swap out the charges.

Rossi has got to quit trying to sell or lease prototype level stuff.    His retail products need to be polished, they need to be cheap relative to commercial heat and electricity and they need to be able to be run in remote locations off a storage battery for start up.

If Rossi does not do these things, he is wasting everybody's time again.