SuzukiSavage.com - rear shock

Donate!

Welcome, Guest. Please Login or Register :: View Members

SuzukiSavage.com › General Category › Rubber Side Down! › rear shock

(Moderators: verslagen1, Dave, Serowbot)

‹ Previous topic | Next topic ›

Pages: 1

Send Topic

Print

rear shock (Read 53 times)

nablats YaBB Newbies Offline SuzukiSavage.com Rocks! Posts: 12	rear shock 07/31/18 at 13:12:11 left rear shock has a bit of side play on the lower mount approx. 2mm other side no play. should I fit a washer or is it not important?
Back to top	IP Logged

stewmills Serious Thumper Offline Imagination is more important than knowledge Posts: 2647 Auburn, AL Gender:	Re: rear shock Reply #1 - 07/31/18 at 13:23:00 IIRC, that is a cap nut. Did you remove the stock belt guard? If so you may have added some slack in the bolt due to the cap head bottoming out, and in that case I would add a washer to take up the slack.
Back to top	2008 \| 152/52.5–Air Mix 3/4 \| Rotella T4 \| Seat Lift w/Sheepskin \| Speedo Rattle \| Rear Pulley Shim \| 140/90-15 Rear \| Kaw Front Pulley \| Relocated Rear Signals FREEDOM ISN'T FREE! IP Logged

faffi Senior Member Offline A.S.A.N. Posts: 343 Norway	Re: rear shock Reply #2 - 07/31/18 at 23:14:07 You should not have any slack there; the shock should be held firmly at the bushing.
Back to top	IP Logged

Pages: 1

Send Topic

Print

‹ Previous topic | Next topic ›

« Home