SuzukiSavage.com - new cam chain

badwolf

Serious Thumper

Offline

Ridin' my Lil'
Bagger - 153k miles
so far

Posts: 808
Palm Beach County, FL
Gender: male

new cam chain
02/21/19 at 06:06:20

I finally put in the new cam chain I got from Lancer a while back. After 81k the old one was out a total of 24mm, with the extension. The new chain is out 12mm to start! When they grenade between 18 to 20 there is not a lot of life ahead without the tensioner extension. The design of this bike is quite short term.
This forum has not only helped members, but has spread knowlege that has kept a lot of bikes on the road that would otherwise have been scrapped.

Back to top

IP Logged

raydawg

Serious Thumper

Offline

SuzukiSavage.com
Rocks!

Posts: 11551
pacific northwest
Gender: male

Re: new cam chain
Reply #1 - 02/21/19 at 08:29:15

Indeed.....I got so much help, it was GREAT.

Man when Dave sent me a replacement belt when mine broke, I was blown away.....

Not sure of other sites, with motorcycles, but I do go on a boating forum, to learn about my boat(s).
They too have some swell guys who help with knowing your boat better, but maybe because in general boats cost more than a savage, so not as many people have them.....
But this site has a lot of folks stepping up to help!

Back to top

“The biggest big business in America is not steel, automobiles, or television. It is the manufacture, refinement and distribution of anxiety.”—Eric Sevareid (1964)

IP Logged

MMRanch

Serious Thumper

Offline

Evil flourishes if
Good Men do Nothing.

Posts: 6154
LYNCHBURG TN
Gender: male

Re: new cam chain
Reply #2 - 02/21/19 at 09:50:39

I replaced the spring inside the tensioner with one about 1/3 as strong back when my bike only had about 4k miles. Now 40k miles later its still barely sticking out two clicks on the ratcheting device . Makes me wounder about the thoughtfulness of the Factory engineers , "What were they thinking , they might have forgot there is a ratcheting device in there ? Wink

Back to top

I see and feel the Holy Spirit in the world , as does anybody who has eyes to see.

IP Logged

verslagen1 YaBB Moderator ModSquad Offline Where there's a will, I want to be in it. Posts: 29042 L.A. California Gender:	Re: new cam chain Reply #3 - 02/21/19 at 14:40:20 Did you install a new rear guide? This one wears quite a bit and will have an impact on plunger extension.
Back to top	Versey's Place Tech Section Index IP Logged

MMRanch Serious Thumper Offline Evil flourishes if Good Men do Nothing. Posts: 6154 LYNCHBURG TN Gender:	Re: new cam chain Reply #4 - 02/21/19 at 15:58:15 Did you install a new rear guide? Whats a Rear-Guide ? I did add another hole on the plunger arm that only let the ratchet thing out one click (2014 or 2015 ?) , and last fall it was out two clicks .
Back to top	I see and feel the Holy Spirit in the world , as does anybody who has eyes to see. IP Logged

verslagen1

YaBB Moderator
ModSquad

Offline

Where there's a
will, I want to be
in it.

Posts: 29042
L.A. California
Gender: male

Re: new cam chain
Reply #5 - 02/21/19 at 16:36:30

badwolf wrote on 02/21/19 at 06:06:20:

I finally put in the new cam chain I got from Lancer a while back. After 81k the old one was out a total of 24mm, with the extension. The new chain is out 12mm to start! When they grenade between 18 to 20 there is not a lot of life ahead without the tensioner extension. The design of this bike is quite short term.
This forum has not only helped members, but has spread knowlege that has kept a lot of bikes on the road that would otherwise have been scrapped.

Did you install a new rear guide for the chain?

Back to top

Versey's Place
Tech Section Index

IP Logged

MMRanch Serious Thumper Offline Evil flourishes if Good Men do Nothing. Posts: 6154 LYNCHBURG TN Gender:	Re: new cam chain Reply #6 - 02/22/19 at 15:26:17 Your right Versey . A new plastic pushing thing might be good after 80,000 miles !
Back to top	I see and feel the Holy Spirit in the world , as does anybody who has eyes to see. IP Logged