Home
Forum
Search
Login
Register
Merch
Donate
Welcome, Guest. Please
Login
or
Register
::
View Members
SuzukiSavage.com
›
General Category
›
The Cafe
› Bike died on the way to work this morning
(Moderators:
verslagen1
,
Dave
,
Serowbot
)
‹
Previous topic
|
Next topic
›
Pages:
1
2
3
4
Bike died on the way to work this morning (Read 291 times)
MMRanch
Serious Thumper
Offline
Evil flourishes if
Good Men do Nothing.
Posts: 6023
LYNCHBURG TN
Gender:
Re: Bike died on the way to work this morning
Reply #30 -
07/01/19 at 19:18:59
Springman , That thing Dave said , about unplugging everything and see when Verseys light "lights-up" as you replug things.
O - yea ... check for green fuzzy stuff in the connectors while your there.
So , is it the red feeder to the switch or is it the one going to the starter relay ?
Does it only plow fuses with the switch in the "ON" position ?
As much moisture as ya'll get I can envision green fussy stuff growing inside the main switch ???
wait a minute ... the big one going to the relay don't have a fuse , but it does have a disconnect don't it.
Back to top
«
Last Edit: 07/01/19 at 20:29:24 by MMRanch
»
I see and feel the Holy Spirit in the world , as does anybody who has eyes to see.
IP Logged
springman
Serious Thumper
Offline
SuzukiSavage.com
Rocks!
Posts: 2246
Spring, Texas
Gender:
Re: Bike died on the way to work this morning
Reply #31 -
07/01/19 at 20:27:29
Hello MM. When I connect the connector of the 2 red wires, one coming from the starter solenoid, and the other red wire going into the harness, and I switch the key to the on position, that is when the fuse blows.
I intend to disconnect all connectors again and start by just connecting the the connector of the 2 red wires and see what happens then. I suspect though I probably won't be able to get to it until Thursday or Friday. I know exactly what you are talking about when you say "green fuzzy stuff" and I have not seen any of it yet.
It is a shame the bike is down. These last couple of days have been great riding days.
Back to top
06 S40 seat mod, airhawk, HD muffler, Shinko 712 140-90-15 rear tire, Shinko 230 front tire, versy cam chain tensioner, Rotella oil, Volar brake pads, EBC clutch & springs
IP Logged
MMRanch
Serious Thumper
Offline
Evil flourishes if
Good Men do Nothing.
Posts: 6023
LYNCHBURG TN
Gender:
Re: Bike died on the way to work this morning
Reply #32 -
07/01/19 at 20:51:33
I wish I was there to help ya "Trouble-shoot" it . Lancer had a lot of electrical problems with REX but it was running GREAT last spring so don't give up !
I'll bet its something really simple when ya find it ...
Mine had a smashed wire between the seat and frame once
Back to top
I see and feel the Holy Spirit in the world , as does anybody who has eyes to see.
IP Logged
justin_o_guy2
Serious Thumper
Offline
What happened?
Posts: 55279
East Texas, 1/2 dallas/la.
Re: Bike died on the way to work this morning
Reply #33 -
07/01/19 at 20:55:50
First rule of fixing stuff
Visual inspection
Back to top
The people never give up their liberties but under some delusion.- Edmund Burke.
IP Logged
batman
Serious Thumper
Offline
SuzukiSavage.com
Rocks!
Posts: 3806
osceola new york
Gender:
Re: Bike died on the way to work this morning
Reply #34 -
07/01/19 at 21:14:43
If you have VOLT/OHM METER , you could use the ohms setting to check the wiring ,without the power on, and a test light or fuses would not be needed .
Back to top
my old work mates called me MacGyver
IP Logged
verslagen1
YaBB Moderator
ModSquad
Offline
Where there's a
will, I want to be
in it.
Posts: 28996
L.A. California
Gender:
Re: Bike died on the way to work this morning
Reply #35 -
07/01/19 at 21:43:33
I had a definite 2 volt drop from the battery to the TCI.
I cleaned all the contacts with deoxit and it's good as new.
https://www.amazon.com/DeoxIT%C2%AE-Gold-Electronic-Maintenance-Caig/dp/B00E1...
Back to top
Versey's Place
Tech Section Index
IP Logged
MMRanch
Serious Thumper
Offline
Evil flourishes if
Good Men do Nothing.
Posts: 6023
LYNCHBURG TN
Gender:
Re: Bike died on the way to work this morning
Reply #36 -
07/01/19 at 22:27:51
That's that
$
stuff .
but if it works and last a long time ...
..............................
I wonder if you disconnect the switch the fuse might stop blowing ... if it don't then good its pin-pointed.
but
reconnecting the switch one wire at a time would put ya on the right
track
line
wire .
you know the first thing to look at is any accessory's you have added on .
**********
I've got it !
Springman , pull them running light blubs out and look into the socket or better yet ... get inside the head light and un-plug the both of them and the headlight for good measure. I have seen the light-bulb-plug-ins loose a wire and that would go strait to ground and blow fuses just like your experiencing . same thing on the tail light wires.
Let me know if that is it and I'll keep on thinking what else it could be .
You eliminate the lights out then there ain't nothing left but the coil , and switches.
Back to top
I see and feel the Holy Spirit in the world , as does anybody who has eyes to see.
IP Logged
springman
Serious Thumper
Offline
SuzukiSavage.com
Rocks!
Posts: 2246
Spring, Texas
Gender:
Re: Bike died on the way to work this morning
Reply #37 -
07/02/19 at 08:15:38
Thanks guys. If I get home early enough I will try to tinker with it some more.
Back to top
06 S40 seat mod, airhawk, HD muffler, Shinko 712 140-90-15 rear tire, Shinko 230 front tire, versy cam chain tensioner, Rotella oil, Volar brake pads, EBC clutch & springs
IP Logged
justin_o_guy2
Serious Thumper
Offline
What happened?
Posts: 55279
East Texas, 1/2 dallas/la.
Re: Bike died on the way to work this morning
Reply #38 -
07/02/19 at 14:50:25
I could understand it a lot easier if it did that on a Monday.
Back to top
The people never give up their liberties but under some delusion.- Edmund Burke.
IP Logged
springman
Serious Thumper
Offline
SuzukiSavage.com
Rocks!
Posts: 2246
Spring, Texas
Gender:
Re: Bike died on the way to work this morning
Reply #39 -
07/02/19 at 17:29:31
Only one connector left to connect and the fuse is still intact. And you probably guessed it, the connector at the very front that takes power to the lights and electronics on handle bar is the one that is yet to be connected. I will take a look at the light connections first and hopefully find the issue there. If not, then I will proceed to the electronics on the handle bar. Hopefully I will have it resolved soon.
Back to top
06 S40 seat mod, airhawk, HD muffler, Shinko 712 140-90-15 rear tire, Shinko 230 front tire, versy cam chain tensioner, Rotella oil, Volar brake pads, EBC clutch & springs
IP Logged
Dave
YaBB Moderator
ModSquad
Offline
SuzukiSavage.com
Rocks!
Posts: 18316
Camp Springs, Kentucky
Gender:
Re: Bike died on the way to work this morning
Reply #40 -
07/03/19 at 08:16:37
One of the "fuse popper" things that can happen, is if the previous owner replaced the screws that hold the turn signal shafts together and used screws that are too long. The longer screw can dig into the wiring that is inside the shaft and create a ground.
If you have to open up the headlight....the first thing I would do is unhook the running light and turn signal wires.
Back to top
Someday I will be old......But not today!
IP Logged
springman
Serious Thumper
Offline
SuzukiSavage.com
Rocks!
Posts: 2246
Spring, Texas
Gender:
Re: Bike died on the way to work this morning
Reply #41 -
07/03/19 at 12:45:09
Thanks Dave, I will look. This examination of the bike revealed a few things I had never noticed. For one, I actually have a pigtail for a battery tender, it was just sort of hidden. Second, there is actually some sort of rubber cover for the starter solenoid, it just was not on the solenoid but rather between it and part of the frame. Ahhh, the things you find when you bother to look.
Back to top
06 S40 seat mod, airhawk, HD muffler, Shinko 712 140-90-15 rear tire, Shinko 230 front tire, versy cam chain tensioner, Rotella oil, Volar brake pads, EBC clutch & springs
IP Logged
springman
Serious Thumper
Offline
SuzukiSavage.com
Rocks!
Posts: 2246
Spring, Texas
Gender:
Re: Bike died on the way to work this morning
Reply #42 -
07/03/19 at 19:25:54
And the culprit is .... right front blinker. Have not had a chance to take it off the bike to look at it but hopefully will do so tomorrow.
Back to top
«
Last Edit: 07/03/19 at 23:46:29 by springman
»
06 S40 seat mod, airhawk, HD muffler, Shinko 712 140-90-15 rear tire, Shinko 230 front tire, versy cam chain tensioner, Rotella oil, Volar brake pads, EBC clutch & springs
IP Logged
justin_o_guy2
Serious Thumper
Offline
What happened?
Posts: 55279
East Texas, 1/2 dallas/la.
Re: Bike died on the way to work this morning
Reply #43 -
07/03/19 at 23:53:25
Check the wires where they pass by the screw that holds the stalk onto the black part.
Back to top
The people never give up their liberties but under some delusion.- Edmund Burke.
IP Logged
justin_o_guy2
Serious Thumper
Offline
What happened?
Posts: 55279
East Texas, 1/2 dallas/la.
Re: Bike died on the way to work this morning
Reply #44 -
07/03/19 at 23:55:14
Definitely not#2 Phillips screws. JIS tips required.
Back to top
The people never give up their liberties but under some delusion.- Edmund Burke.
IP Logged
Pages:
1
2
3
4
‹
Previous topic
|
Next topic
›
Forum Jump »
» 10 most recent posts
» 10 most recent topics
General Category
- Rubber Side Down!
- Technical Documents/Reference
- The Marketplace
»» The Cafe
- Politics, Religion (Tall Table)
- Forum Upgrade Issues / Tests
« Home
« Home
SuzukiSavage.com
05/17/25 at 10:46:23
›
General Category
›
The Cafe
› Bike died on the way to work this morning
SuzukiSavage.com
» Powered by
YaBB 2.2
!
YaBB
© 2000-2007. All Rights Reserved.