SuzukiSavage.com - WTB a new head

Welcome, Guest. Please Login or Register :: View Members

SuzukiSavage.com › General Category › The Marketplace › WTB a new head

(Moderators: verslagen1, Dave, Serowbot)

‹ Previous topic | Next topic ›

Pages: 1

WTB a new head (Read 51 times)

Murphy Chow YaBB Newbies Offline SuzukiSavage.com Rocks! Posts: 3	WTB a new head 01/12/20 at 00:05:22 Anyone have a Savage head, the bike was free but the exhaust stud is flush inside the head. I dont weld so I dont know anyone that can free it up for me. anyways not sure if it matters but I have a LS650 from 1986. I might also need some side covers also and a carb boot from the carb to the airbox. Thanks M
Back to top	IP Logged

Armen Serious Thumper Offline Half-Witted Wrench-Jockey from Jersey Posts: 1454	Re: WTB a new head Reply #1 - 01/12/20 at 07:20:24 Where are you? As long as someone hasn't broken off an EZ Out in the stud, it might not be a big deal to remove.
Back to top	In theory, theory and reality are the same. In reality, they aren't... IP Logged

batman Serious Thumper Offline SuzukiSavage.com Rocks! Posts: 3806 osceola new york Gender:	Re: WTB a new head Reply #2 - 01/14/20 at 10:15:51 I have a set of side covers (came to me , painted flat black right over the decals) ,message me if interested.
Back to top	my old work mates called me MacGyver IP Logged

Dave

YaBB Moderator
ModSquad

Offline

SuzukiSavage.com
Rocks!

Posts: 18314
Camp Springs, Kentucky
Gender: male

Re: WTB a new head
Reply #3 - 01/24/20 at 05:10:45

I have a head from an 87......I am out of town for a few days and will get you photos next week.

The stud most likely got broken off when the previous owner tried to remove it, and it is likely stuck. A good machinist may be able to drill it out without damaging the head.......and/or they could install a thread repair. That may cost as much as getting a replacement head.

Someday I will be old......But not today!

IP Logged

Pages: 1

‹ Previous topic | Next topic ›

« Home