SuzukiSavage.com - Handlebar Questions

Welcome, Guest. Please Login or Register :: View Members

SuzukiSavage.com › General Category › Rubber Side Down! › Handlebar Questions

(Moderators: verslagen1, Dave, Serowbot)

‹ Previous topic | Next topic ›

Pages: 1

Handlebar Questions (Read 45 times)

Ando

YaBB Newbies

Offline

SuzukiSavage.com
Rocks!

Posts: 7

Handlebar Questions
08/19/20 at 17:47:43

Hi. Looking at some new bar options as my 96 came with some 9" high bars with only about a 3" pullback, sorta like high drag bars. no more stock risers Sad

my three questions:

do we need dimpled, drilled or neither on our bars (my guess is neither)

does anyone have some part numbers for the stock 1" risers and clamps to see if i can get some OEMs

any 1" bar ends and grips should fit yeah?

planning to throw on some 10" apes like this

https://www.jpcycles.com/product/500-839/j-p-cycles-1-chrome-10-ape-hanger-ha...

IP Logged

ohiomoto Serious Thumper Offline SuzukiSavage.com Rocks! Posts: 2825	Re: Handlebar Questions Reply #1 - 08/19/20 at 17:54:32 Neither unless you want to hide wires. https://www.partzilla.com/catalog/suzuki/motorcycle/1996/savage-ls650p/steeri... (You might need to source aftermarket risers and use the stock rubbers.) Yes, 1" grips.
Back to top	IP Logged

Ando YaBB Newbies Offline SuzukiSavage.com Rocks! Posts: 7	Re: Handlebar Questions Reply #2 - 08/19/20 at 18:04:28 looks like item 7-16 x2 for the risers?
Back to top	IP Logged

norm92de Serious Thumper Offline SuzukiSavage.com Rocks! Posts: 1180 El Paso TX Gender:	Re: Handlebar Questions Reply #3 - 08/19/20 at 19:32:35 You should be able to find some stock risers since a lot of people have removed them. I filed the dimples off my switches so as to move them around.
Back to top	2014 S40. Raptor. idle mixture adj.Needle raised one notch. 4000' altitude. Stock jets. Shell Rotella synthetic. IP Logged

Pages: 1

‹ Previous topic | Next topic ›

« Home