SuzukiSavage.com - BOLT ON CYLINDER HEAD

Dave

YaBB Moderator
ModSquad

Offline

SuzukiSavage.com
Rocks!

Posts: 18314
Camp Springs, Kentucky
Gender: male

BOLT ON CYLINDER HEAD
06/12/21 at 06:05:57

This head has been cleaned up and made ready to install. The head was taken apart and pressure washed - then the exhaust port was opened up in the DragBikeMike "D" shape to improve flow. The head and head cover mating surfaces were refinished to ensure a good seal. The valves were cleaned up and inspected, and new Viton seals were installed. The compression release shaft has a new seal installed. The cylinder head cover and rocker inspection caps was painted with ceramic engine paint. The rockers are welded and resurfaced by Webcam. $270 shipped to the mainland 48 states in a medium size Flat Rate Box.

If you want a camshaft add $100 for a good stock cam - or $300 for one of Lancer's performance cams (no core charge in this sale - however if you have a good core please send it to Lancer).

Back to top

IMG_8351.JPG

Someday I will be old......But not today!

IP Logged

Dave YaBB Moderator ModSquad Offline SuzukiSavage.com Rocks! Posts: 18314 Camp Springs, Kentucky Gender:	Re: BOLT ON CYLINDER HEAD Reply #1 - 06/12/21 at 06:07:56 Sealing surface, combustion chamber and valves. The dark spots are small carbon discolored areas - once your start riding it will all get a carbon coating!
Back to top	IMG_8352_001.JPG Someday I will be old......But not today! IP Logged

Dave YaBB Moderator ModSquad Offline SuzukiSavage.com Rocks! Posts: 18314 Camp Springs, Kentucky Gender:	Re: BOLT ON CYLINDER HEAD Reply #2 - 06/12/21 at 06:09:18 Intake port
Back to top	IMG_8353.JPG Someday I will be old......But not today! IP Logged

Dave YaBB Moderator ModSquad Offline SuzukiSavage.com Rocks! Posts: 18314 Camp Springs, Kentucky Gender:	Re: BOLT ON CYLINDER HEAD Reply #3 - 06/12/21 at 06:09:44 Exhaust port (D shaped).
Back to top	IMG_8354.JPG Someday I will be old......But not today! IP Logged

Dave YaBB Moderator ModSquad Offline SuzukiSavage.com Rocks! Posts: 18314 Camp Springs, Kentucky Gender:	Re: BOLT ON CYLINDER HEAD Reply #4 - 06/12/21 at 06:10:51 Decompression lever area - the cable mount and screws are included but will not be attached, as it sticks up too far to fit in the shipping box.
Back to top	IMG_8355.JPG Someday I will be old......But not today! IP Logged

Dave YaBB Moderator ModSquad Offline SuzukiSavage.com Rocks! Posts: 18314 Camp Springs, Kentucky Gender:	Re: BOLT ON CYLINDER HEAD Reply #5 - 06/12/21 at 06:11:33 Valve area and cam bearings in head.
Back to top	IMG_8356.JPG Someday I will be old......But not today! IP Logged

Dave YaBB Moderator ModSquad Offline SuzukiSavage.com Rocks! Posts: 18314 Camp Springs, Kentucky Gender:	Re: BOLT ON CYLINDER HEAD Reply #6 - 06/12/21 at 06:12:07 Head cover
Back to top	IMG_8357.JPG Someday I will be old......But not today! IP Logged

Dave YaBB Moderator ModSquad Offline SuzukiSavage.com Rocks! Posts: 18314 Camp Springs, Kentucky Gender:	Re: BOLT ON CYLINDER HEAD Reply #7 - 06/12/21 at 06:13:25 Head cover cam bearings and rockers. One rocker has been used about 6,000 miles, the other one has been welded/resurfaced by Webcam.
Back to top	IMG_8359.JPG Someday I will be old......But not today! IP Logged

Dave YaBB Moderator ModSquad Offline SuzukiSavage.com Rocks! Posts: 18314 Camp Springs, Kentucky Gender:	Re: BOLT ON CYLINDER HEAD Reply #8 - 06/12/21 at 06:14:10 New Viton valve seals.
Back to top	IMG_8361.JPG Someday I will be old......But not today! IP Logged

Dave YaBB Moderator ModSquad Offline SuzukiSavage.com Rocks! Posts: 18314 Camp Springs, Kentucky Gender:	Re: BOLT ON CYLINDER HEAD Reply #9 - 06/12/21 at 06:15:38 There is a crack in the bottom fin over the exhaust port.......no harm, no foul and it won't hurt a thing.
Back to top	IMG_7028_001.JPG Someday I will be old......But not today! IP Logged

LS650THUMPER Junior Member Offline SuzukiSavage.com Rocks! Posts: 64 Ma Gender:	Re: BOLT ON CYLINDER HEAD Reply #10 - 06/15/21 at 19:28:53 wow, nice, glad I looked here, think i need one of these, I am interested , will let you know
Back to top	IP Logged

LS650THUMPER Junior Member Offline SuzukiSavage.com Rocks! Posts: 64 Ma Gender:	Re: BOLT ON CYLINDER HEAD Reply #11 - 06/19/21 at 20:54:34 is this still available , and regular cam
Back to top	IP Logged

grandpa Senior Member Offline Old but not cold!!! Posts: 259 Bartlett TN Gender:	Re: BOLT ON CYLINDER HEAD Reply #12 - 04/29/22 at 16:47:42 Is this still available?
Back to top	Blue '06, seat mod, K&N drop-in filter, desnorkeled, 55 pilot, 152.5 main, 1/3 spacer, dyna muff, factory bug shield, 11.5 Progressive rear shocks, debadged, fork boots, 110/90-19, 140/90-15 IP Logged

Dave YaBB Moderator ModSquad Offline SuzukiSavage.com Rocks! Posts: 18314 Camp Springs, Kentucky Gender:	Re: BOLT ON CYLINDER HEAD Reply #13 - 05/01/22 at 11:41:42 grandpa wrote on 04/29/22 at 16:47:42: Is this still available? That one is gone - but I have another one that is ready to paint and then assemble. Do you want silver or black? I am not sure what rockers I have for this head.......I will have to check.
Back to top	Someday I will be old......But not today! IP Logged

grandpa

Senior Member

Offline

Old but not cold!!!

Posts: 259
Bartlett TN
Gender: male

Re: BOLT ON CYLINDER HEAD
Reply #14 - 05/01/22 at 14:47:21

I will take it. Black is preferred. My grandson's 2006 keeps leaking at the cam cover. I have had it off and on too many times. Last time a bolt broke when I tried to loosen it. Another one started stripping as soon as it got past finger tight. Needless to say it pumped oil everywhere. I can bring his old head and swap over rockers etc. I am about 7 hours away from you. Will be a nice road trip in my Miata! Just let me know and you can have his old head.

Back to top

Blue '06, seat mod, K&N drop-in filter, desnorkeled, 55 pilot, 152.5 main, 1/3 spacer, dyna muff, factory bug shield, 11.5 Progressive rear shocks, debadged, fork boots, 110/90-19, 140/90-15

IP Logged