SuzukiSavage.com - Spanner

Donate!

Welcome, Guest. Please Login or Register :: View Members

SuzukiSavage.com › General Category › The Cafe › Spanner

(Moderators: verslagen1, Dave, Serowbot)

‹ Previous topic | Next topic ›

Pages: 1

Send Topic

Print

Spanner (Read 83 times)

zevenenergie Serious Thumper Offline SuzukiSavage.com Rocks! Posts: 1767 The Netherlands Den Haag	Spanner 11/09/21 at 06:11:06 I wanted to share this, sow it some were on te internet.
Back to top	Do what you know is right. (you can always use fear as a counselor later) IP Logged

ohiomoto Serious Thumper Offline SuzukiSavage.com Rocks! Posts: 2825	Re: Spanner Reply #1 - 11/09/21 at 13:05:49 Nice find!
Back to top	IP Logged

justin_o_guy2 Serious Thumper Offline What happened? Posts: 55279 East Texas, 1/2 dallas/la.	Re: Spanner Reply #2 - 11/09/21 at 13:40:46 That duzzit without welding. Waitaminnit.. Duzzit? Second look, I'm not sure,,
Back to top	The people never give up their liberties but under some delusion.- Edmund Burke. IP Logged

verslagen1 YaBB Moderator ModSquad Offline Where there's a will, I want to be in it. Posts: 28996 L.A. California Gender:	Re: Spanner Reply #3 - 11/09/21 at 15:35:07 I don't see any welding, but that doesn't mean they could've welded the post in on the backside. I doubt it though as the post is plated.
Back to top	Versey's Place Tech Section Index IP Logged

ohiomoto Serious Thumper Offline SuzukiSavage.com Rocks! Posts: 2825	Re: Spanner Reply #4 - 11/09/21 at 18:33:09 Looks like you have to remove the clutch basket to install it. That's a bit of a PITA, but it's cool to see different solutions to the chain guide problem.
Back to top	IP Logged

MMRanch Serious Thumper Offline Evil flourishes if Good Men do Nothing. Posts: 6023 LYNCHBURG TN Gender:	Re: Spanner Reply #5 - 11/11/21 at 19:53:33 I don't get it. does it adjust itself instead of letting the plunger slip out ?
Back to top	I see and feel the Holy Spirit in the world , as does anybody who has eyes to see. IP Logged

verslagen1 YaBB Moderator ModSquad Offline Where there's a will, I want to be in it. Posts: 28996 L.A. California Gender:	Re: Spanner Reply #6 - 11/11/21 at 19:59:29 MMRanch wrote on 11/11/21 at 19:53:33: I don't get it. does it adjust itself instead of letting the plunger slip out ? Nope, this just provides what the second hole provides. You have to remove the plate to get back to the stock position.
Back to top	Versey's Place Tech Section Index IP Logged

MMRanch Serious Thumper Offline Evil flourishes if Good Men do Nothing. Posts: 6023 LYNCHBURG TN Gender:	Re: Spanner Reply #7 - 11/11/21 at 21:04:30 OH , I get it ! It just moves the other end instead of the second hole thing. Its not as easy to do , but a welder is not required.
Back to top	I see and feel the Holy Spirit in the world , as does anybody who has eyes to see. IP Logged

Tocsik Serious Thumper Offline the singularity Posts: 1206 Denver, CO Gender:	Re: Spanner Reply #8 - 11/12/21 at 12:37:04 And, doesn't have the pin to prevent falling out eventually?
Back to top	'08\|Raptor\|Dyna\|Stock jets & no other carb changes @ 5280' alt\|'slavy CCT\|Kawa front pulley\|130/90 rear tire\|7" LED headlight\|3" straight risers\|FIAMM El Grande horns\|Mutazu hard bags IP Logged

verslagen1 YaBB Moderator ModSquad Offline Where there's a will, I want to be in it. Posts: 28996 L.A. California Gender:	Re: Spanner Reply #9 - 11/12/21 at 12:41:07 The Germans had a different way, but this plate just extends the adjuster, so yes the plunger can fall out.
Back to top	Versey's Place Tech Section Index IP Logged

Pages: 1

Send Topic

Print

‹ Previous topic | Next topic ›

« Home