SuzukiSavage.com - Rubber dampeners

Welcome, Guest. Please Login or Register :: View Members

SuzukiSavage.com › General Category › Rubber Side Down! › Rubber dampeners

(Moderators: verslagen1, Dave, Serowbot)

‹ Previous topic | Next topic ›

Pages: 1

Rubber dampeners (Read 87 times)

Theduderino Full Member Offline The dude abides… Posts: 216 Looziana Gender:	Rubber dampeners 11/27/21 at 05:14:50 good morning gang, As my bike has evolved, my rear pulley has axial play of an eighth of an inch or more. I have replace the stock bearings, but I have not replace the rubber dampeners. Could this cause pulley wobble?
Back to top	2000 Savage LS650P. Bobber kit, PWK CARB, air box mod. Rear bearing/spacer mod.. Do not fear mistakes, there are none. IP Logged

ohiomoto Serious Thumper Offline SuzukiSavage.com Rocks! Posts: 2825	Re: Rubber dampeners Reply #1 - 11/27/21 at 05:32:57 That's pretty normal for these bikes. You can either ignore it or do a mod to tighten it up. DragBikeMike did a double bearing mod that works well and seems to be the current "gold standard", but there are a couple of others. It shouldn't be too hard to search up.
Back to top	IP Logged

Theduderino Full Member Offline The dude abides… Posts: 216 Looziana Gender:	Re: Rubber dampeners Reply #2 - 11/27/21 at 05:36:01 I appreciate it, it’s just starting to make my belt squeak a little bit and it’s annoying
Back to top	2000 Savage LS650P. Bobber kit, PWK CARB, air box mod. Rear bearing/spacer mod.. Do not fear mistakes, there are none. IP Logged

Theduderino Full Member Offline The dude abides… Posts: 216 Looziana Gender:	Re: Rubber dampeners Reply #3 - 11/27/21 at 05:36:42 I’ll have to check the axle nuts again for torque value, I think it’s somewhere in the neighborhood of 80 pounds
Back to top	2000 Savage LS650P. Bobber kit, PWK CARB, air box mod. Rear bearing/spacer mod.. Do not fear mistakes, there are none. IP Logged

Theduderino Full Member Offline The dude abides… Posts: 216 Looziana Gender:	Re: Rubber dampeners Reply #4 - 11/27/21 at 05:40:47 https://youtube.com/shorts/rUBlfIAhe7o?feature=share
Back to top	2000 Savage LS650P. Bobber kit, PWK CARB, air box mod. Rear bearing/spacer mod.. Do not fear mistakes, there are none. IP Logged

Theduderino Full Member Offline The dude abides… Posts: 216 Looziana Gender:	Re: Rubber dampeners Reply #5 - 11/27/21 at 05:41:36 That’s the YouTube link I made real quick let me know if it works
Back to top	2000 Savage LS650P. Bobber kit, PWK CARB, air box mod. Rear bearing/spacer mod.. Do not fear mistakes, there are none. IP Logged

verslagen1 YaBB Moderator ModSquad Offline Where there's a will, I want to be in it. Posts: 28996 L.A. California Gender:	Re: Rubber dampeners Reply #6 - 11/27/21 at 07:59:45 Theduderino wrote on 11/27/21 at 05:36:42: I’ll have to check the axle nuts again for torque value, I think it’s somewhere in the neighborhood of 80 pounds ITEM N-m \| ft-lb Rear axle nut 55.0 88.0 \| 40.5 64.9
Back to top	Versey's Place Tech Section Index IP Logged

DragBikeMike

Serious Thumper

Offline

SuzukiSavage.com
Rocks!

Posts: 4471
Honolulu

Re: Rubber dampeners
Reply #7 - 11/27/21 at 13:07:16

Dan, all I get from your vid link is audio. What are you trying to show us? Did you replace the bearing in your pulley hub?

This link for the duplex bearing mod should help. It's easy to do. You will need the bearing and will also have to have your spacer machined as shown. Armen does the spacers.

http://suzukisavage.com/cgi-bin/YaBB.pl?num=1561964431

This link provides some good info on pulley alignment. It starts at reply #56.

http://suzukisavage.com/cgi-bin/YaBB.pl?num=1563129686

Good luck, Mike

Knowledge is power.

IP Logged

Hiko Senior Member Offline SuzukiSavage.com Rocks! Posts: 250 Tauranga New Zealand Gender:	Re: Rubber dampeners Reply #8 - 11/27/21 at 13:30:05 I managed to see the video Dan your pulley wobble is bad You will never get your belt running right with that amount of wobble Drag bike Mikes advice is where you shoud be looking to fix this
Back to top	IP Logged

Armen Serious Thumper Offline Half-Witted Wrench-Jockey from Jersey Posts: 1454	Re: Rubber dampeners Reply #9 - 11/29/21 at 20:08:47 I have one of the spacers in stock. If you want it, I can send it. Just send me yours when you swap them out. Really simply job. DBM figured out a brilliant, effective, cheap, and easy fix to this common problem. LMK thanks Armen
Back to top	In theory, theory and reality are the same. In reality, they aren't... IP Logged

Theduderino Full Member Offline The dude abides… Posts: 216 Looziana Gender:	Re: Rubber dampeners Reply #10 - 12/01/21 at 00:25:27 Armen, That would be AWESOME!!!
Back to top	2000 Savage LS650P. Bobber kit, PWK CARB, air box mod. Rear bearing/spacer mod.. Do not fear mistakes, there are none. IP Logged

Armen Serious Thumper Offline Half-Witted Wrench-Jockey from Jersey Posts: 1454	Re: Rubber dampeners Reply #11 - 12/01/21 at 00:41:22 PM sent!
Back to top	In theory, theory and reality are the same. In reality, they aren't... IP Logged

Pages: 1

‹ Previous topic | Next topic ›

« Home