SuzukiSavage.com - Brake master cylinder compability

Welcome, Guest. Please Login or Register :: View Members

SuzukiSavage.com › General Category › Technical Documents/Reference › Brake master cylinder compability

(Moderators: verslagen1, Dave, Serowbot)

‹ Previous topic | Next topic ›

Pages: 1

Brake master cylinder compability (Read 34 times)

Dave7 YaBB Newbies Offline SuzukiSavage.com Rocks! Posts: 1	Brake master cylinder compability 07/02/22 at 11:36:02 I have an 1986 model that the brake master cylinder seems to have quit. No resistance from the brake handle and no front brake. Rears works. Is the later 2000s brake cylinder usable on the early model? As they seem to be easy to find on eBay, etc. Thanks!
Back to top	IP Logged

verslagen1

YaBB Moderator
ModSquad

Online

Where there's a
will, I want to be
in it.

Posts: 28993
L.A. California
Gender: male

Re: Brake master cylinder compability
Reply #1 - 07/02/22 at 13:28:53

For the most part yes.
the handlebar same diameter
master cylinder same diameter

what's different is the brake switch.
so you may have to adapt the wires to fit.
new models use spade fittings (but I think they're metric)

one other thing, the dragbar style had a shorter master with the hose mounted on the front, new style is mounted on the end.
don't know if that'll make a diff but you're forewarned.

Versey's Place
Tech Section Index

IP Logged

Pages: 1

‹ Previous topic | Next topic ›

« Home