SuzukiSavage.com - Cover plate for the muffler switch

Welcome, Guest. Please Login or Register :: View Members

SuzukiSavage.com › General Category › Rubber Side Down! › Cover plate for the muffler switch

(Moderators: verslagen1, Dave, Serowbot)

‹ Previous topic | Next topic ›

Pages: 1

Cover plate for the muffler switch (Read 80 times)

winterwolf2000 YaBB Newbies Offline SuzukiSavage.com Rocks! Posts: 11	Cover plate for the muffler switch 09/08/22 at 06:49:21 Hey guys, I am putting on the screaming eagle on my bike the HD 65747-94 going to do it just like it says to here on the site. I am not seeing anything on the cover plate however. Has anyone got a link or name of one I can get? I know the original one will not fit on with the switch.
Back to top	IP Logged

verslagen1 YaBB Moderator ModSquad Offline Where there's a will, I want to be in it. Posts: 28996 L.A. California Gender:	Re: Cover plate for the muffler switch Reply #1 - 09/08/22 at 21:59:50 go to fleabay and search muffler heat shield
Back to top	Versey's Place Tech Section Index IP Logged

winterwolf2000 YaBB Newbies Offline SuzukiSavage.com Rocks! Posts: 11	Re: Cover plate for the muffler switch Reply #2 - 09/09/22 at 07:11:51 Do I need to stick with the 1 3/4 Or do I need to go bigger?
Back to top	IP Logged

justin_o_guy2

Serious Thumper

Offline

What happened?

Posts: 55279
East Texas, 1/2 dallas/la.

Re: Cover plate for the muffler switch
Reply #3 - 09/09/22 at 08:03:53

The reason you aren't getting the answers you are looking for is because what you are doing isn't something we have seen much of. IDK Who has done what you want to do. If you were asking for guidance on how to get a Dyna muffler installed, you would have already had the answers.
It's not that you are being given The Cold Shoulder, just nobody knows how to help you.
Maybe someone will come along and understand the questions, frankly I'm a bit confused about a cover? I'm not sure exactly what problem you're having.
Maybe if you tried rewording the question someone could come up with something that would help you.

The people never give up their liberties but under some delusion.- Edmund Burke.

IP Logged

verslagen1 YaBB Moderator ModSquad Offline Where there's a will, I want to be in it. Posts: 28996 L.A. California Gender:	Re: Cover plate for the muffler switch Reply #4 - 09/09/22 at 10:11:35 winterwolf2000 wrote on 09/09/22 at 07:11:51: Do I need to stick with the 1 3/4 Or do I need to go bigger? the OD of the muffler connection is 1.688"... 1.75" is fine HD muffs are 1.75" and the stock header is about 2" the clamps usually allow for 2" but if not, you can substitute.
Back to top	Versey's Place Tech Section Index IP Logged

justin_o_guy2

Serious Thumper

Offline

What happened?

Posts: 55279
East Texas, 1/2 dallas/la.

Re: Cover plate for the muffler switch
Reply #5 - 09/09/22 at 13:02:07

Search

T-clamp hose clamps.
IDK how big of a town you're in but the industrial supply houses often have these on the shelf. And reasonably priced, at least that is what I found.
There is an area of town where I go for bearings ,like for the mower. They cost half of the price at the lawnmower store. They even sell belts. Generally about half price.
The mower places hafta buy stuff somewhere.
Those fancy clamps get sold to the motorcycle store from a warehouse.

The people never give up their liberties but under some delusion.- Edmund Burke.

IP Logged

winterwolf2000 YaBB Newbies Offline SuzukiSavage.com Rocks! Posts: 11	Re: Cover plate for the muffler switch Reply #6 - 09/10/22 at 06:32:28 That is what I was looking for if the clamps would fit thank you for the info. I was just looking for the Exhaust Heat Shield wasn't sure what size was needed wasn't sure if it needed to be larger or not. Thank you
Back to top	IP Logged

Tocsik Serious Thumper Offline the singularity Posts: 1206 Denver, CO Gender:	Re: Cover plate for the muffler switch Reply #7 - 09/10/22 at 07:46:40 This one from Cobra is nice quality. You can get cheaper, but you get what you pay for. Got in on evil Amazon. https://www.amazon.com/gp/product/B000WJ6W06/ref=ppx_yo_dt_b_search_asin_imag...
Back to top	dyna_heat_shield.jpg '08\|Raptor\|Dyna\|Stock jets & no other carb changes @ 5280' alt\|'slavy CCT\|Kawa front pulley\|130/90 rear tire\|7" LED headlight\|3" straight risers\|FIAMM El Grande horns\|Mutazu hard bags IP Logged

justin_o_guy2 Serious Thumper Offline What happened? Posts: 55279 East Texas, 1/2 dallas/la.	Re: Cover plate for the muffler switch Reply #8 - 09/10/22 at 10:23:01 Looks good, Toc. Looks like you have let that poor, defenseless peg drag through a corner..
Back to top	The people never give up their liberties but under some delusion.- Edmund Burke. IP Logged

winterwolf2000 YaBB Newbies Offline SuzukiSavage.com Rocks! Posts: 11	Re: Cover plate for the muffler switch Reply #9 - 09/10/22 at 21:38:10 Thank you for the link it's what I wa looking for I appreciate it!
Back to top	IP Logged

Tocsik Serious Thumper Offline the singularity Posts: 1206 Denver, CO Gender:	Re: Cover plate for the muffler switch Reply #10 - 09/11/22 at 09:57:47 justin_o_guy2 wrote on 09/10/22 at 10:23:01: Looks good, Toc. Looks like you have let that poor, defenseless peg drag through a corner.. I think I remember exactly where that happened.....
Back to top	'08\|Raptor\|Dyna\|Stock jets & no other carb changes @ 5280' alt\|'slavy CCT\|Kawa front pulley\|130/90 rear tire\|7" LED headlight\|3" straight risers\|FIAMM El Grande horns\|Mutazu hard bags IP Logged

Pages: 1

‹ Previous topic | Next topic ›

« Home