SuzukiSavage.com - Used Cam Useable?

Moarpower

Senior Member

Offline

SuzukiSavage.com
Rocks!

Posts: 331

Used Cam Useable?
11/15/22 at 23:26:57

Hey guys.

I bought this DR650 cam off eBay from Germany. There were only 2 I could find, and the other was twice the price.

I paid 160AUD for this cam. The new prices are about 400-500Aud, and I couldn't find one in stock even if I wanted to use one. THere is some very minor pitting. Most of the marks on the surface are smooth and just discoloured. I can not catch a nail on any of the journal surfaces the marks that look like grooves on the lobes are just the color and i cant feel them at all. The pitting I can feel but there.is only a few spots.

So my question. Will this used cam get me a few thousand miles? Or should I just send it back? They had a no refund policy on their sale page, but if it isn't fit for use, ill be able to get a refund through Paypal.

Back to top

PXL_20221116_070449829-min.jpg

« Last Edit: 11/16/22 at 01:04:59 by Moarpower »

IP Logged

Moarpower Senior Member Offline SuzukiSavage.com Rocks! Posts: 331	Re: Used Cam Useable? Reply #1 - 11/15/22 at 23:27:34 Lobe wear
Back to top	PXL_20221116_070304270_PORTRAIT-min.jpg IP Logged

Moarpower Senior Member Offline SuzukiSavage.com Rocks! Posts: 331	Re: Used Cam Useable? Reply #2 - 11/15/22 at 23:27:49 More lobe
Back to top	PXL_20221116_070327773_PORTRAIT-min.jpg IP Logged

Moarpower Senior Member Offline SuzukiSavage.com Rocks! Posts: 331	Re: Used Cam Useable? Reply #3 - 11/15/22 at 23:28:11 Journal
Back to top	PXL_20221116_070357974_PORTRAIT-min.jpg IP Logged

Moarpower Senior Member Offline SuzukiSavage.com Rocks! Posts: 331	Re: Used Cam Useable? Reply #4 - 11/15/22 at 23:28:29 journal 2
Back to top	PXL_20221116_070350351_PORTRAIT-min.jpg IP Logged

Moarpower Senior Member Offline SuzukiSavage.com Rocks! Posts: 331	Re: Used Cam Useable? Reply #5 - 11/15/22 at 23:28:40 profile of lobe
Back to top	PXL_20221116_070334613_PORTRAIT-min.jpg IP Logged

Moarpower Senior Member Offline SuzukiSavage.com Rocks! Posts: 331	Re: Used Cam Useable? Reply #6 - 11/15/22 at 23:29:09 profile 2
Back to top	PXL_20221116_070344019_PORTRAIT-min.jpg IP Logged

DragBikeMike

Serious Thumper

Offline

SuzukiSavage.com
Rocks!

Posts: 4471
Honolulu

Re: Used Cam Useable?
Reply #7 - 11/16/22 at 09:53:06

The journals could be polished, but the lobes are too heavily scored and pitted. I don't understand how the seller thought that was a useable cam.

I know you are in Australia, but I don't understand why you can't simply buy new Genuine Suzuki parts. Are there no Suzuki dealers? You can't buy parts on-line (Partzilla, Suzuki Partshouse, BikeBandit, etc.)?

Back to top

Knowledge is power.

IP Logged

Moarpower

Senior Member

Offline

SuzukiSavage.com
Rocks!

Posts: 331

Re: Used Cam Useable?
Reply #8 - 11/16/22 at 11:06:36

Hi Mike.
I have tried dealers in my area and interstate and have had no luck sourcing many of the parts I need. Most have come from the USA and New Zealand. As for the cam, the cost of a new one just blows my budget way out. I can get the part online, but it's half what I paid for the bike.

I'll return this item and continue the search. I thought it may have been useable as there were only a few small pits. Most of what you can see on the surface is just discolouration

UPDATE: I found the part for around 450 AUD on revzilla but they wont ship it to Australia

Back to top

« Last Edit: 11/16/22 at 12:27:52 by Moarpower »

IP Logged

Moarpower

Senior Member

Offline

SuzukiSavage.com
Rocks!

Posts: 331

Re: Used Cam Useable?
Reply #9 - 11/16/22 at 11:50:32

I have contacted a local cam specialist who make racing cams to see if they can repair it.
If the repair and regrind is still cheaper than the over 630 dollar new part, I'll go that route with a 50 percent refund on the purchase of the cam.

If not, I'll return this cam and the repair will have to wait until after my wedding in February when I can out more money into it.

Back to top

IP Logged

verslagen1 YaBB Moderator ModSquad Offline Where there's a will, I want to be in it. Posts: 28996 L.A. California Gender:	Re: Used Cam Useable? Reply #10 - 11/16/22 at 13:16:33 I believe the dr cams are taller, so you might be able to regrind them to ls spec.
Back to top	Versey's Place Tech Section Index IP Logged

Moarpower Senior Member Offline SuzukiSavage.com Rocks! Posts: 331	Re: Used Cam Useable? Reply #11 - 11/16/22 at 14:45:09 verslagen1 wrote on 11/16/22 at 13:16:33: I believe the dr cams are taller, so you might be able to regrind them to ls spec. Thanks Vers. I'm hoping to avoid that as I want to get a bit more out of the LS. If regrinding will remove that much material I'll just buy a new one in a few months.
Back to top	IP Logged

justin_o_guy2

Serious Thumper

Offline

What happened?

Posts: 55279
East Texas, 1/2 dallas/la.

Re: Used Cam Useable?
Reply #12 - 11/16/22 at 15:45:15

If not, I'll return this cam and the repair will have to wait until after my wedding in February when I can out more money into it.

Marrying a rich girl? Are you sure you're even gonna be allowed to keep your bike?

New wife,,,

Motorcycles are dangerous, you need to sell it.

Hubby

You sound like my first ex-wife...

New wife

I didn't know you had been married before

Hubby

I haven't

Back to top

The people never give up their liberties but under some delusion.- Edmund Burke.

IP Logged

Moarpower Senior Member Offline SuzukiSavage.com Rocks! Posts: 331	Re: Used Cam Useable? Reply #13 - 11/16/22 at 16:59:50 Hahah
Back to top	IP Logged

Moarpower

Senior Member

Offline

SuzukiSavage.com
Rocks!

Posts: 331

Re: Used Cam Useable?
Reply #14 - 11/16/22 at 18:29:40

Ok so I have gotten a 50 percent refund for the part and getting it reground. The guys at Teigh racing cams here said the pitting is very minimal and would run for a long time if it was getting oiled correctly. As its going into a different bike they are going the regrind it to its original profile. Will be ready in a week.

The 96.44mm bore is happening today and should be completed tomorrow

Back to top

IP Logged