SuzukiSavage.com - Can't loosen Allen bolt at bottom of the fork.

Welcome, Guest. Please Login or Register :: View Members

SuzukiSavage.com › General Category › Rubber Side Down! › Can't loosen Allen bolt at bottom of the fork.

(Moderators: verslagen1, Dave, Serowbot)

‹ Previous topic | Next topic ›

Pages: 1

Can't loosen Allen bolt at bottom of the fork. (Read 30 times)

zevenenergie

Serious Thumper

Offline

SuzukiSavage.com
Rocks!

Posts: 1767
The Netherlands Den Haag

Can't loosen Allen bolt at bottom of the fork.
06/24/23 at 06:42:34

I'm trying to take my front fork apart.
But I can't get the Allen bolt at the bottom of the left leg out.
That part on the inside where the allan bolt is in, rotates.

I have put the leg back together so the spring can apply pressure but it still turns when I turn the Allen screw.

I don't know how to solve this.
Does anyone know a solution?

Edit:
I gave the Allen bolt a few hits and somehow it came loose after that.

Do what you know is right. (you can always use fear as a counselor later)

IP Logged

Dave YaBB Moderator ModSquad Offline SuzukiSavage.com Rocks! Posts: 18314 Camp Springs, Kentucky Gender:	Re: Can't loosen Allen bolt at bottom of the fork Reply #1 - 06/24/23 at 08:53:28 You need to build a tool to keep the part inside the forks from turning. http://suzukisavage.com/cgi-bin/YaBB.pl?num=1365965809/1
Back to top	Someday I will be old......But not today! IP Logged

zevenenergie Serious Thumper Offline SuzukiSavage.com Rocks! Posts: 1767 The Netherlands Den Haag	Re: Can't loosen Allen bolt at bottom of the fork Reply #2 - 06/24/23 at 09:16:07 Tanks Dave for your anser and time you put in it to find the link. I appreciate it.
Back to top	Do what you know is right. (you can always use fear as a counselor later) IP Logged

Pages: 1

‹ Previous topic | Next topic ›

« Home