SuzukiSavage.com - 2007 S40 Ignition module needed!!!

Welcome, Guest. Please Login or Register :: View Members

SuzukiSavage.com › General Category › Rubber Side Down! › 2007 S40 Ignition module needed!!!

(Moderators: verslagen1, Dave, Serowbot)

‹ Previous topic | Next topic ›

Pages: 1

2007 S40 Ignition module needed!!! (Read 68 times)

Job

YaBB Newbies

Offline

SuzukiSavage.com
Rocks!

Posts: 45
Farmington, New Mexico
Gender: male

2007 S40 Ignition module needed!!!
08/01/23 at 12:16:45

Hi, my 2007 S40 has been very difficult to start for over a month, it backfires, and bucks, and takes forever to start. So I ordered a new air filter and plug and cleaned the carb. Now it won't fire at all, no spark. The coil checks good, as do the fuses, battery(12.8 volts), and connections. The ignition module has no output at the coil connection. Does anyone on here have a cdi that would fit my bike for sale? #J4T14871, Suzuki part #32900-24B30.

2009 S40.

IP Logged

LANCER Serious Thumper Alliance Member Offline Savage Beast Performance Parts Posts: 10801 Oklahoma Gender:	Re: 2007 S40 Ignition module needed!!! Reply #1 - 08/01/23 at 13:18:51 Your battery voltage was 12.8v. Was that a static voltage check or was it taken while you were hitting the start button ? It makes a difference. If the voltage is 10v or less while hitting the start button, it will not be sufficient to engage the start sequence.
Back to top	IP Logged

Job YaBB Newbies Offline SuzukiSavage.com Rocks! Posts: 45 Farmington, New Mexico Gender:	Re: 2007 S40 Ignition module needed!!! Reply #2 - 08/01/23 at 16:34:13 The voltage while cranking with the plug removed was 12.6 volts. It's a nearly new fully charged battery.
Back to top	2009 S40. IP Logged

LANCER Serious Thumper Alliance Member Offline Savage Beast Performance Parts Posts: 10801 Oklahoma Gender:	Re: 2007 S40 Ignition module needed!!! Reply #3 - 08/01/23 at 16:41:26 Job wrote on 08/01/23 at 16:34:13: The voltage while cranking with the plug removed was 12.6 volts. It's a nearly new fully charged battery. Spark plug removed ?
Back to top	IP Logged

Job YaBB Newbies Offline SuzukiSavage.com Rocks! Posts: 45 Farmington, New Mexico Gender:	Re: 2007 S40 Ignition module needed!!! Reply #4 - 08/01/23 at 18:25:52 Yes I was checking for spark.
Back to top	2009 S40. IP Logged

ThumperPaul Serious Thumper Offline SuzukiSavage.com Rocks! Posts: 2156 Houston, Texas Gender:	Re: 2007 S40 Ignition module needed!!! Reply #5 - 08/06/23 at 11:50:46 Stupid expensive $562 on Revzilla!! I'd be trying something like this junk on eBay (see link) before dropping $562.... There are a few used ones for sale under $200. https://www.ebay.com/itm/313989387962?fits=Submodel%3ALS650P%7CYear%3A2006%7C...
Back to top	IP Logged

Job YaBB Newbies Offline SuzukiSavage.com Rocks! Posts: 45 Farmington, New Mexico Gender:	Re: 2007 S40 Ignition module needed!!! Reply #6 - 08/10/23 at 18:25:49 ThumperPaul I replaced the ignition module and that didnt help. I got voltage to the module still no spark. On advice I checked the sending coil and had an open coil. I am in the process of getting a used coil. I hope that works.
Back to top	2009 S40. IP Logged

ThumperPaul Serious Thumper Offline SuzukiSavage.com Rocks! Posts: 2156 Houston, Texas Gender:	Re: 2007 S40 Ignition module needed!!! Reply #7 - 08/11/23 at 04:22:14 Good luck! The mark-up on motorcycle parts is criminal! Hope you git er thumping!!
Back to top	IP Logged

Job YaBB Newbies Offline SuzukiSavage.com Rocks! Posts: 45 Farmington, New Mexico Gender:	Re: 2007 S40 Ignition module needed!!! Reply #8 - 08/27/23 at 18:16:20 Well I finally got to hear it run again, I was beginning to worry. I got the 2 nd sending coil, stator in and installed and it runs. I can't believe I haven't been able to ride in a month. Thanks for all of your help, I appreciate it.
Back to top	2009 S40. IP Logged

Pages: 1

‹ Previous topic | Next topic ›

« Home