SuzukiSavage.com - Thread size on the engine long thru-bolts?

Welcome, Guest. Please Login or Register :: View Members

SuzukiSavage.com › General Category › Rubber Side Down! › Thread size on the engine long thru-bolts?

(Moderators: verslagen1, Dave, Serowbot)

‹ Previous topic | Next topic ›

Pages: 1

Thread size on the engine long thru-bolts? (Read 18 times)

och Serious Thumper Offline SuzukiSavage.com Rocks! Posts: 639	Thread size on the engine long thru-bolts? 08/12/23 at 06:54:05 Anyone know the thread size on these bolts by any chance?
Back to top	IP Logged

DragBikeMike

Serious Thumper

Offline

SuzukiSavage.com
Rocks!

Posts: 4471
Honolulu

Re: Thread size on the engine long thru-bolts?
Reply #1 - 08/12/23 at 09:27:31

If you are referring to the long bolts that secure the head cover on the right side (you reported one as "stripped'), they are M6 x 1.0 mm. Pitch is 1.0 mm. These bolts thread into blind holes, so they are not "thru-bolts".

If you are referring to some other bolt, then you will have to be more specific.

A thru-bolt utilizes a nut.

Knowledge is power.

IP Logged

och Serious Thumper Offline SuzukiSavage.com Rocks! Posts: 639	Re: Thread size on the engine long thru-bolts? Reply #2 - 08/12/23 at 11:19:55 Sorry, I meant the long bolts on the bottom that secure the footpegs and go through the entire engine. I figured it out, they are m10x1.25 - i am replacing the acorn nuts with class 10.9 flanged serrated nuts for more convenient removal of these bolts.
Back to top	IP Logged

Pages: 1

‹ Previous topic | Next topic ›

« Home