SuzukiSavage.com - Handlebar risers

Donate!

Welcome, Guest. Please Login or Register :: View Members

SuzukiSavage.com › General Category › Rubber Side Down! › Handlebar risers

(Moderators: verslagen1, Dave, Serowbot)

‹ Previous topic | Next topic ›

Pages: 1 2

Send Topic

Print

Handlebar risers (Read 112 times)

ThumperPaul Serious Thumper Offline SuzukiSavage.com Rocks! Posts: 2154 Houston, Texas Gender:	Re: Handlebar risers Reply #15 - 07/10/24 at 09:29:07 I measured 80mm (just over 3”) for the bolts that go with the clamps for the buckhorn style handlebar.
Back to top	IMG_4830-compressed.jpeg IP Logged

Surviving Philly Senior Member Offline SuzukiSavage.com Rocks! Posts: 293	Re: Handlebar risers Reply #16 - 07/10/24 at 09:35:06 Appreciated thanks guys. It looks like the bar used on the alter models wants Allen cap bolts, instead of hex heads. My plan is to use the bar as the lower clamp, assuming it's possible.
Back to top	IP Logged

verslagen1 YaBB Moderator ModSquad Offline Where there's a will, I want to be in it. Posts: 28996 L.A. California Gender:	Re: Handlebar risers Reply #17 - 07/10/24 at 10:06:15 Depending on the bars you choose, you may want some short risers to clear the tank. with drags, you might want 2" risers.
Back to top	Versey's Place Tech Section Index IP Logged

Pages: 1 2

Send Topic

Print

‹ Previous topic | Next topic ›

« Home