SuzukiSavage.com - Upside Down Forks

Welcome, Guest. Please Login or Register :: View Members

SuzukiSavage.com › General Category › The Cafe › Upside Down Forks

(Moderators: verslagen1, Dave, Serowbot)

‹ Previous topic | Next topic ›

Pages: 1

Upside Down Forks (Read 38 times)

ThumperPaul Serious Thumper Offline SuzukiSavage.com Rocks! Posts: 2152 Houston, Texas Gender:	Upside Down Forks 08/19/24 at 07:01:11 With upside down forks being the ‘new’ thing and marketing tech rage, when will upside down forks be considered the right side up forks? Personally, I’m not convinced that putting the slider end closer to the road grim is an improvement in design.
Back to top	IP Logged

Dave

YaBB Moderator
ModSquad

Offline

SuzukiSavage.com
Rocks!

Posts: 18313
Camp Springs, Kentucky
Gender: male

Re: Upside Down Forks
Reply #1 - 08/19/24 at 11:03:25

There are advantages to having things upside down - any new motorcycle designed for performance or ride comfort will likely have upside down forks (provided it is not a retro bike).

The larger/thicker/heavier top tube is up top where it is part of the chassis - allowing the bottom "unsprung" part of the forks to be made much lighter. The front wheel/brake/fork assembly that is bouncing up and down can react more quickly when it is lighter.

The larger top tubes allow for more stiffness in the front end - with the normal forks the top tubes are smaller and less rigid.

The improved valve mechanism that controls the fluid dynamics is now stationary and not bouncing around. This is an advantage when you have electronic ride control stuff built into the forks.

Someday I will be old......But not today!

IP Logged

ThumperPaul Serious Thumper Offline SuzukiSavage.com Rocks! Posts: 2152 Houston, Texas Gender:	Re: Upside Down Forks Reply #2 - 08/19/24 at 11:11:50 Thanks Dave. Best summary explanation I've ever read! So when do we start calling them "right side up forks"? Since they are clearly right end up.
Back to top	IP Logged

JOG Serious Thumper Offline SuzukiSavage.com Rocks! Posts: 2052 Longview, Texas Gender:	Re: Upside Down Forks Reply #3 - 08/20/24 at 08:20:03 I guess the engineers who design pogo sticks were just ahead of us a bit.
Back to top	IP Logged

ThumperPaul

Serious Thumper

Offline

SuzukiSavage.com
Rocks!

Posts: 2152
Houston, Texas
Gender: male

Re: Upside Down Forks
Reply #4 - 08/20/24 at 08:49:05

JOG wrote on 08/20/24 at 08:20:03:

I guess the engineers who design pogo sticks were just ahead of us a bit.

It is kinda hard to believe they were being designed and engineered wrong for so many decades. What were they thinking? Did Japan not have pogo sticks back in the 60s? And what about all those brilliant engineers at Harley back in the early 1900s? Even BSA couldn’t get it right!

IP Logged

Ruttly Serious Thumper Offline Thumpers Rule Posts: 5400 Manteca , CA Gender:	Re: Upside Down Forks Reply #5 - 08/20/24 at 09:06:33 While they are more stable , it’s appears weight distribution is also upside down. I’m ol skool I always thought they were weird. I’m sure the unsprung weight is lower too.
Back to top	The Topic Terminator IP Logged

JOG Serious Thumper Offline SuzukiSavage.com Rocks! Posts: 2052 Longview, Texas Gender:	Re: Upside Down Forks Reply #6 - 08/20/24 at 09:55:38 The best I can understand it is Ya have lower unsprung weight at the expense of a little higher center of mass. And I say that hoping to not get corrected.
Back to top	IP Logged

Pages: 1

‹ Previous topic | Next topic ›

« Home