Hi, family

I installed new brake switches, and while testing them, I noticed that they didn't affect the brake light (it remained on even when no brakes were pressed). So, I unplugged both switches, and the brake light stayed on, even when neither switch was connected to the electrical system. If I remember correctly, if I remove both switches, the brake light should remain off. For me to turn off the brake light, I have to unplug it or power off the bike. I checked the connections and wires, and they appear to be fine.  Besides the switches, what else and where should I look to find what's wrong?

Thanks Ya'll!

You think it might be the bulb itself? I'll give it a try. However, the bike has the stock turn signals and stop light, and if I remember correctly, the turn signals and running lights are the same as the front, and the stop light only turns on when the brakes are activated. Also, the running lights are only working when using the turn signals. I attached a photo of the bike in idle and the lights on, and the right turn signal active.  

Getting the bulb tomorrow and trying it out, will update!