Donate!
Welcome, Guest. Please Login or Register :: View Members
SuzukiSavage.com › General Category › Rubber Side Down! › Grease / Lubricant Questions
(Moderators: verslagen1, Dave, Serowbot) ‹ Previous topic | Next topic ›
Pages: 1
Send Topic Print
Grease / Lubricant Questions (Read 32 times)
Gregski
Ex Member
Grease / Lubricant Questions
03/15/04 at 09:24:58  
Recently I replaced my mirrors on my bike, and noticed the threads on the stems where they screw into the lever assembly on the handlebars were dry as a bone.  Should I have put some sort of greese/lubricant on the threads?  Same question goes for the bolts that hold the break/clutch levers and grips on the handlebars, as I will be swaping my handlebars this weekend, and would like to know if the bolts need something on them.
Back to top
 
 
  IP Logged
ironman
Ex Member
Re: Grease / Lubricant Questions
Reply #1 - 03/16/04 at 05:01:37  
Yes. just a small drop of motor oil can save you a big hassle in the future.
Back to top
 
 
  IP Logged
Kropatchek
Serious Thumper
*****
Offline

Why more than 1
cylinder?

Posts: 1457
Alphen a/d Rijn  Netherlands
Gender: male
Re: Grease / Lubricant Questions
Reply #2 - 03/16/04 at 15:28:17  
Grin
First BOLT and NUT rule:  ???


              NEVER assemble DRY.
Back to top
 
 
Never ask your bike to scream before her throat is warm.
'93 Sav in '96 ( yellow) looks
  IP Logged
Pages: 1
Send Topic Print
‹ Previous topic | Next topic ›


« Home

 
« Home
SuzukiSavage.com
05/16/25 at 15:35:13



› General Category › Rubber Side Down! › Grease / Lubricant Questions


SuzukiSavage.com » Powered by YaBB 2.2!
YaBB © 2000-2007. All Rights Reserved.