SuzukiSavage.com - Carb screw length?

Donate!

Welcome, Guest. Please Login or Register :: View Members

SuzukiSavage.com › General Category › Rubber Side Down! › Carb screw length?

(Moderators: verslagen1, Dave, Serowbot)

‹ Previous topic | Next topic ›

Pages: 1

Send Topic

Print

Carb screw length? (Read 7 times)

Durandal Ex Member	Carb screw length? 09/05/05 at 07:03:00 I searched the earlier posts regarding replacing the screws on the carb with new ones when doing the re-jet. I know they are M5 screws, but what length are they, especially the screws on the float bowl? Want to make sure I get the right ones before I start taking my carb apart.
Back to top	IP Logged

LANCER Serious Thumper Alliance Member Offline Savage Beast Performance Parts Posts: 10875 Oklahoma Gender:	Re: Carb screw length? Reply #1 - 09/05/05 at 07:14:56 Take the old ones from the carb to the hardware store with you, that way you get the right length, width and thread size.
Back to top	IP Logged

Reelthing Serious Thumper Alliance Member Offline Fish or ride that is the question Posts: 5397 Houston,Tx Gender:	Re: Carb screw length? Reply #2 - 09/05/05 at 19:00:49 M5 25mm on the bowl and m5 20mm on the diaphram cover is what I used
Back to top	IP Logged

threezukes Ex Member	Re: Carb screw length? Reply #3 - 09/06/05 at 04:03:45 I just bought some today. I took the old screws to the store and the sizes were 5x10mm for the top and 5x15mm for the bowl
Back to top	IP Logged

Reelthing Serious Thumper Alliance Member Offline Fish or ride that is the question Posts: 5397 Houston,Tx Gender:	Re: Carb screw length? Reply #4 - 09/06/05 at 04:59:02 I needed to measure twice - pickup the spares - and thread length of 10/15 it is
Back to top	IP Logged

Pages: 1

Send Topic

Print

‹ Previous topic | Next topic ›

« Home