SuzukiSavage.com - Need some input

Donate!

Welcome, Guest. Please Login or Register :: View Members

SuzukiSavage.com › General Category › Rubber Side Down! › Need some input

(Moderators: verslagen1, Dave, Serowbot)

‹ Previous topic | Next topic ›

Pages: 1 2

Send Topic

Print

Need some input (Read 8 times)

vroom1776 Serious Thumper Offline Posts: 2110 Gender:	Re: Need some input Reply #15 - 05/31/06 at 09:11:02 Here's another option: Buy a long hollow pipe, 1.75" ID (or just a hair smaller) and cut to desired length. Stuff 2 or 3 1.75" OD baffles in there and secure. Attach to header pipe w/ red permatex. Rejet and ride. If you wnat to go w/ this, I'm sure we can figure out good ways to secure the baflles...
Back to top	IP Logged

Savage_Rob Serious Thumper Alliance Member Offline Mechanically Inclined Amateur Posts: 6972 Texas (Dallas area) Gender:	Re: Need some input Reply #16 - 05/31/06 at 12:03:04 I can definitely understand the MAC gettin' on your nerves. I'm kinda the same way. I like the sound but it's loud. One of these days I'll try the sporty muffler and see how it does. In the mean time here's my workaround. QuietEar From HearTech
Back to top	1998\|MAC muffler\|ceramic coated header\|K&N air filter\|Amal Mk2 carb\|Odyssey battery\|iridium plug\|NC windshield\|Dunlop 491s\|Superbrace\|EBC brake rotor\|12.5" Progressive shocks\|Kuryakyn ISO grips IP Logged

Pages: 1 2

Send Topic

Print

‹ Previous topic | Next topic ›

« Home