SuzukiSavage.com - Made a new toy (sandblaster)

DangMan

Senior Member
2005 No Login

Offline

Thump thump thump

Posts: 327
Denmark
Gender: male

Made a new toy (sandblaster)
04/27/11 at 11:06:06

As mentioned in another thred i vanted to make my own pressure pot sandblaster !
Almost finished and just wanted to flash the result !
It needs to be sandblasted Grin

and painted, maby a sexy yellow !
Before you starts crying about the danger about cutting/welding an old gas container, I did remember to fill it up with water !
In the back you can see the bottom of the sandblasting cabin !

I used this one as a "blueprint" One of my freinds bought one so I took a long look at it

Back to top

IP Logged

Serowbot YaBB Moderator ModSquad Offline OK.... so what's the speed of dark? Posts: 29300 Tucson Az Gender:	Re: Made a new toy (sandblaster) Reply #1 - 04/27/11 at 11:30:48 Yours is cooler... Don't paint it,.. it's perfect the way it is... ...
Back to top	Ludicrous Speed !... ... ... IP Logged

splash07 Serious Thumper Offline Posts: 911 Charleston, SC Gender:	Re: Made a new toy (sandblaster) Reply #2 - 04/27/11 at 13:39:55 That is awesome, perhaps a step by step would be useful in the tech section.
Back to top	IP Logged

justin_o_guy2

Serious Thumper

Offline

What happened?

Posts: 55279
East Texas, 1/2 dallas/la.

Re: Made a new toy (sandblaster)
Reply #3 - 04/27/11 at 14:14:33

Ohh, Man,, please dont stress over the "beauty" of it. If youre actually worried about rust on it, get some Ospho from Kelly Moore, liquid, not gel, It is a dilute phosphoric acid, which chemically changes Iron Oxide into Iron Phosphate.. wont stop scale, one layer only,, but that cylinder is okay, best I can tell. It looks great, as is.
Remember the rule of 80/20. Eighty % of a job can be done in 20% of the time required to do 100% of the job.

Back to top

The people never give up their liberties but under some delusion.- Edmund Burke.

IP Logged

IN-S40 Full Member Offline SuzukiSavage.com Rocks! Posts: 128 Michigan City, IN Gender:	Re: Made a new toy (sandblaster) Reply #4 - 04/27/11 at 14:25:31 Looks good just the way it is, looks like a tool thats ment to be used!
Back to top	IP Logged

DangMan

Senior Member
2005 No Login

Offline

Thump thump thump

Posts: 327
Denmark
Gender: male

Re: Made a new toy (sandblaster)
Reply #5 - 04/28/11 at 07:05:54

splash07 wrote on 04/27/11 at 13:39:55:

That is awesome, perhaps a step by step would be useful in the tech section.

Work in progress, but I have typed the most basic in here, but ill ad more pictures and problem/solution as I go !
http://www.tornbjerg.dk/hp/savagesources/index.php?thump=sandblaster

justin_o_guy2 wrote on 04/27/11 at 14:14:33:

Ohh, Man,, please dont stress over the "beauty" of it. If youre actually worried about rust on it, get some Ospho from Kelly Moore, liquid, not gel, It is a dilute phosphoric acid, which chemically changes Iron Oxide into Iron Phosphate.. wont stop scale, one layer only,, but that cylinder is okay, best I can tell. It looks great, as is.
Remember the rule of 80/20. Eighty % of a job can be done in 20% of the time required to do 100% of the job.

Yearh, maby I have passed the 80% line by now

Im sure the cylinder is structurel intact, I tapped it with a little hammer all the critical places and before i started I filled it with water and pressure tested it !

IN-S40 wrote on 04/27/11 at 14:25:31:

Looks good just the way it is, looks like a tool thats ment to be used!

Tools are best in use Cheesy

Back to top

IP Logged