SuzukiSavage.com - Alternative header pipe?

Welcome, Guest. Please Login or Register :: View Members

SuzukiSavage.com › General Category › Rubber Side Down! › Alternative header pipe?

(Moderators: verslagen1, Dave, Serowbot)

‹ Previous topic | Next topic ›

Pages: 1

Alternative header pipe? (Read 169 times)

Dogshitsandwich

YaBB Newbies

Offline

SuzukiSavage.com
Rocks!

Posts: 3

Alternative header pipe?
03/22/15 at 12:53:44

Hi guys,

Been a member for a while and have just been quietly reading all the great tips and advise. I've done the raptor petcock change and as I work in machine shop did my own slot and dowel pin cam chain tensioner mod.

Anyway! My question... Is there any other header pipes that fit a savage? Mine is home made out of mild steel, Full of holes and welds that look like chewing gum. I didn't realise until I went to replace the exhaust wrap and the headers I've seen on eBay are real expensive and/or in the US so postage to England would suck...

Cheers!

Mark

IP Logged

verslagen1 YaBB Moderator ModSquad Offline Where there's a will, I want to be in it. Posts: 28996 L.A. California Gender:	Re: Alternative header pipe? Reply #1 - 03/22/15 at 13:39:09 raask is the only other I know of, and it's on your side of the pond too.
Back to top	Versey's Place Tech Section Index IP Logged

justin_o_guy2 Serious Thumper Offline What happened? Posts: 55279 East Texas, 1/2 dallas/la.	Re: Alternative header pipe? Reply #2 - 03/22/15 at 14:33:04 Ugggh, Raask, loud, and hard to jet for, where MPG matters. I'd stick with muffler shop pipe. You could have it ceramic or chrome. The trick is ring that seal lands on and the mounting flange presses against.
Back to top	The people never give up their liberties but under some delusion.- Edmund Burke. IP Logged

LANCER Serious Thumper Alliance Member Offline Savage Beast Performance Parts Posts: 10803 Oklahoma Gender:	Re: Alternative header pipe? Reply #3 - 03/23/15 at 08:05:33 I don't remember who, but one of the guys who came to the site here had contacted me about a few parts got a header made by this company; http://www.stainlessheaders.com/customheaders It looked to be a decent header and it only cost him about $125 I believe. That was well over a year ago.
Back to top	IP Logged

Dogshitsandwich YaBB Newbies Offline SuzukiSavage.com Rocks! Posts: 3	Re: Alternative header pipe? Reply #4 - 03/23/15 at 11:15:37 Thanks guys! I've found a couple of places nearby that do fabrication, I'm going to enquire there. Thought if I machined the end part they could just weld it to a piece of stainless tube?
Back to top	IP Logged

HovisPresley

Serious Thumper

Offline

Good Vibrations!

Posts: 991
Midlands, UK
Gender: male

Re: Alternative header pipe?
Reply #5 - 03/23/15 at 19:02:39

Mr Sandwich, I'd potentially be after something similar myself, (and I'm in the UK). What sort of Internal Diameter were you thinking of? Are we talking 1.5" ID, which is apparently as wide as should go, ideally , in tuning terms. I'd certainly be interested in buying a pipe, can you put a link to the firm you'll use, please? For your pipe, are you getting stainless, or ceramic coated etc? Thanks

'96 Bobbobbobber

IP Logged

Dogshitsandwich YaBB Newbies Offline SuzukiSavage.com Rocks! Posts: 3	Re: Alternative header pipe? Reply #6 - 03/24/15 at 12:09:57 Hi Hovis! The header I'm looking to replace is similar to the one in the attached pic... but the one currently on my bike is basically made of old pig iron, holes and chewing gum. Attitude Customs in Southampton might be sorting me out but I'll keep you updated.
Back to top	image_224.jpg IP Logged

HovisPresley Serious Thumper Offline Good Vibrations! Posts: 991 Midlands, UK Gender:	Re: Alternative header pipe? Reply #7 - 03/24/15 at 13:10:21 Chewing gum works wonders for exhausts! Use Nicorette to help the engine stop smoking I look forward to seeing your new pipe when its done. Cheers, Hovis
Back to top	'96 Bobbobbobber IP Logged

Pages: 1

‹ Previous topic | Next topic ›

« Home